Instructions for Use

- 4 - - 5 -

ENGLISHFRAN

AIS

INSTALL TRANSMITTER BATTERIES

TRANSMITTER INTRUCTIONS

1.Remove the battery cover on the bottom of the transmitter (gure 6)

2.Install 3*1.5V AA batteries (not included) in correct polarities (Figure 7)

3.Close the battery cover (Figure 8)

A.Power Switch

B.Steering Trim

C:Throttle trim (low speed to high speed)

Green LED will ash when power is low on the

transmitter, please replace the batteries before continuing

1.Forward 2.Brake 3.Left

4.Right 5.Backward

NOTICE!

1. When installing batteries, please be sure to match the polarities

labeled on the battery holder.

2. Do not mix old and new batteries.

3. Do not mix different type of batteries.

Figure 6

(1) Red LED

(2) Green LED

Figure 7 Figure 8

NEUTRAL

3 4

PLAY TIME

15min