Instructions for Use

- 7 -
ENGLISHFRAN
Ç
AIS
TROUBLESHOOTING
Short run time
• Battery damaged/not charged
• Motor dirty or brushes worn
• Check/change battery
• Check/clean/replace
Sluggish action
• Motor dirty or brushes worn
• Bind in drivetrain
• Vehicle battery is not charged
• Check/clean/replace
• Clean/adjust
• Replace/recharge
Do not operate
• Transmitter batteries low
• Transmitter powered off
• Vehicle battery is not charged
• Replace/recharge
• Power On
• Replace/recharge
Problem Possible Cause Solution
Poor range
• Low transmitter batteries
• Receiver antenna damaged
• Replace/recharge
• Check/repair/replace
The system will not
Connect
• Transmitter and receiver too near
each other
• Transmitter and receiver too near
large metal objects
(vehicles, etc.)
• Receiver accidentally put in bind
mode so receiver is no longer bound
• Move transmitter 8–12 feet
(2.4–3.6m) from receiver
• Move away from large metal
objects (vehicles, etc.)
• Rebind transmitter and
receiver
The receiver quits
responding
During operation
• Low battery voltage • Completely recharge battery
Receiver loses
its bind
• Transmitter accidentally put in bind
mode, ending bind to receiver
• Bind transmitter to receiver