Safer Choice Standard

Report No. 130815040GZU-001
IMPERIAL INDUSTRIAL SUPPLY
Page 18 of 33
Issued: 23-Dec-2013
Revised: None
Photo #
Item
no.
1
Name
Manufacturer/
trademark
2
Type / model
2
Technical data and securement
means
Mark(s) of
conformity
3
4.0 Critical Components
13 33
Cautionary
Marking on Kettle
Variour Various
For Models FT825CR &
FT862CR, the marking was
painted on Fixing bar of kettle
cover. As alternative, stemping,
painting are all acceptable. Refer
to Illustration 1 for details.
NR
1A 34
Cart Assembly
(For all models
other than
FT862CR)
NANFANG
MACHINE
FACTORY
Various
Measured overall dimension 760
mm （L） x 385 mm （W） x 910
mm (H). It consists of the following
parts, tightly secured together by
screws. All accessible edges were
smooth and well rounded.
NR
1A 34a Wheel Various Various
Enameled Steel + Rubber. OD Ø
450 mm. For all models except
FT862CR and FT824PP, the
length of the longitudinal axis is
570 mm, for model FT824PP, the
length is 630 mm.
NR
1A 34b Frame Various Various
Enameled Steel, Overall
measured 456 mm (L) x 378 mm
x 575 mm (H).
NR
1A 35c Foot Various Various
Steel + thermoplastic, not
adjustable. Two provided, each
tightly secured to the fame.
NR
1A 34d Cabinet Various Various
Enameled Steel, provided a door.
Cabinet inner size measured 460
mm (L) x 385 mm (W) x 335 mm
(H).
NR
3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted and
only visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section
5.0 for details.
NOTES:
1) Not all item numbers are indicated (called out) in the photos, as their location is obvious.
2) “Various“ means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the "Mark(s)
of conformity" can be used.
ED 16.3.15 (1-Jan-13) Mandatory