FunTime Palace Popper 8oz Hot Oil Popcorn Machine ( TABLETOP: FT824PP W/ CART: FT865PP INSTRUCTION MANUAL (FOR AC 120V/60HZ)
IMPORTANT SAFEGUARDS Assembling Parts When using any electrical appliance, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR POPCORN MACHINE. 2. 3. 4. 5. 6. 7. Do not touch hot surfaces. Always use handles or knobs to operate. To avoid any risk of electrical shock, do not immerse cord or plug into water or other liquid. Close supervision is necessary when it is being used by or near children.
TABLETOP AND CART MODEL CART MODEL ONLY Assembling Parts Assembling Procedures: A. Main unit x 1 pc C. Popcorn scoop x 1 pc １. ２. ３. ４. ５. B. Kettle x 1 pc D. Kernel scoop + Oil scoop set Assemble the kettle (B) on the supporters which are built into the main unit (A), and connect the cord from the unit to the socket in the ceiling. Use bolts & washers (Package B) provided to connect the Long stand (F) and the 2 pcs square pole (E) together.
Operation Procedures: Cleaning and Maintenance User should follow these procedures: 1) Make sure the popcorn maker is unplugged before you do any of the following. 2) Before using this unit, please carefully check if voltage is suitable to your countries power. (Please check if your voltage matches the rating label found next to the power cord). 3) Clean the inside of the kettle and popper with a damp towel before using for the first time. 4) Main unit has 3 function switches as follows: Fig.
Trolley components Spare part components Housing Block plate PC865-105 PC862-109 Working platform PC862-112RG / B S Crumb tray Kettle Handrail PC862- 11 0 PC862-113RG/BS PC860-111 Lamp holder Wheels PC862-1 0 4 Glass front door Short stand PC862- 11 6 R / B Square poles PC862- 11 4 R / B Long stand PC862 -118RG/BS PC862- 11 5 R / B PC865 -1 0 6 Upper gear housing PC865- 1 0 2 S i d e glass panel PC865-107 Package B Package C PC-Package-B P C-P ack age - C Lower gear housing PC86
