Use and Care Manual

PAGE 3/3

WARNING:

>This unit has been designed to support the

maximum loads shown. Exceeding these

load limits could cause sagging, instability,

product collapse, and/or serious injury.

>DO NOT allow children to climb on unit.

>Periodically check all fittings and re-tighten

any screws as necessary.

NOTE:

1. Installation to Wood Stud Walls

1.1 Use a stud finder (commercially available) and mark the

location with an awl or pencil.

1.2 Pre-drill a hole in the wood stud at the marked location

to insert Screw (D) at Step 6.

2. Installation to Concrete & Brick Walls

2.1 Mark the location to be used for securing the unit.

2.2 Drill holes using an electric drill at the marked location.

2.3 Insert a Concrete Anchor (F) into the hole using hammer.