Instructions / Assembly

Assembly Instruction

WARNING:

>This unit has been designed to support the

maximum loads shown. Exceeding these

load limits could cause sagging, instability,

product collapse, and/or serious injury.

>DO NOT allow children to climb on unit.

>Put heavier items on lower shelves.

its Space. its Budget

Approx. 30 minutes

Recomm. 1 Person

No Tools Required

Install Rounded Umbrella Support (6) to

Upper Support Pole (4) and tighten it.

STEP 4

Install Umbrella Support (5) on Upper Support

Pole (4) and connect to Lower Support Pole (3).

Tighten all parts.

STEP 3

Recommended Maximum Weight

Lbs

FNBQ2212020180424

MODEL :

FNBQ-22120

Tighten

pcs

Tighten

pcs

Furinno Yijin Multi-functional Hat and

Coat Rack Stand

Customer Support

www.furinno.com

NEED HELP? For replacement requests or product inquiries,

please contact our Customer Service Team by emailing us at

support@furinno.com. Thank you for selecting Furinno!

PAGE 1
STEP 3 STEP 4 Install Umbrella Support (5) on Upper Support Pole (4) and connect to Lower Support Pole (3). Tighten all parts. Install Rounded Umbrella Support (6) to Upper Support Pole (4) and tighten it. pcs its Space. its Budget Assembly Instruction pcs Furinno Yijin Multi-functional Hat and Coat Rack Stand Tighten Tighten MODEL : FNBQ-22120 Approx. 30 minutes Tighten Recomm.
PAGE 2
No Hardware List Qty 1 Co-Stand 2pcs 2 Primary Stand 1pc 3 Lower Support Pole 1pc 4 Upper Support Pole 1pc 5 Umbrella Support 4pcs 6 Rounded Umbrella Support 2pcs STEP 1 Connect Co-Stand (1) to Primary Stand (2) and tighten it. Tighten Tighten STEP 2 Connect Lower Support Pole (3) to Primary Stand (2) and tighten it. USEFUL HINTS BEFORE YOU START: 1. Read each step carefully before starting. 2. It is important that each step is performed in correct order to avoid difficulties. 3.