IGUANA PRO 30A ESC - Manual

www.furitek.com www.facebook.com/furitekelectronics [e-mail]
Features:
- Support brushed DC motor only
- FOC (Field-oriented control) technology
- Plug&Play designed for AXIAL SCX24 crawlers
- BIG BEC 5.5V 2.5A
- Support 2S-3S lipo battery
- Mini size and lightweight
- Super easy programming via App on BOTH Android and IOS
- Firmware update available (bluetooth module required)
- Real-time telemetry up to 10Hz
- Ability to run with stock TX/RX or any other TX/RX
Specifications:
- Support 2S-3S batteries
- Big BEC: 5.5V 2.5A (No external BEC needed for big servos)
- Constant current: 30A
- Burst current: 50A
- Built in power switch
- Dimension (mm): 22.5(L)x 11.5(W)
- Weight: 2.2 grams
Pinout:
Battery input:
Support 2s-3s liPo batteries
Power switch
ON/OFF
+-
ESC Signal
Bat- Bat+
Bluetooth
Motor output: Brushed motor
FURICAR
FURITEK IGUANA PRO Manual V1.0
- Step 3: Please click ”Output voltage”
and then select
“5V or 6.5V”
- Step 1: Please make sure to plug your battery to esc and open FURICAR app on android or IOS device
Note: Output voltage “6.5V” led on main Esc always on when active
Output voltage “5V” led on main Esc off
- Step 2: Please click “Menu” and click “Running”
Bluetooth:
- Default password to connect to the bluetooth is "1234"
*Change password:
- Step 1: Please make sure to plug your battery to esc and open FURICAR app on android
or IOS device
- Step 2: Please Click the Setting icon (see picture)
- Step 3: Please Click ”Change Password” menu, a new window pops up, type your new password
and then click “OK”
Setting
Common
Update Firmware
Change Password
Please type your password again
Default password: 1234 Change password
1234
Cancel OK
Change Password
Type your new password
Cancel
Your new password (4 numbers)
Confirm your new password
Change Output voltage:
(Warning: High Voltage might kill your servo, make sure your servo can work with high voltage)
FURITEK IGUANA PRO 30A/50A BRUSHED ESC
FOR AXIAL SCX24 WITH FOC TECHNOLOGY
Cutoff voltage
Output voltage
Rotation Direction
Mode
Forward-Reverse With
Brake
3.5V
5V
5V
6.5V