IGUANA PRO 30A ESC - Manual

www.furitek.com www.facebook.com/furitekelectronics [e-mail]
FURITEK IGUANA PRO Manual V1.0
-
-
-
-
-
-
Esc Manual calibration:
A.Calibration on ESC Mainboard:
Step 1: Turn on your radio and move your radio throttle stick FORWARD or throttle stick BACKWARD
Step 2:
Plug the battery to your esc (The ESC LED indicator will start blinking followed by a motor beeping sound)
and then ESC LED indicator will blink 4 time and motor will beep 4 time)
Step 3: Set to 0% Throttle or lowest speed (please make sure that your radio throttle stick at
NEUTRAL POSITION, ESC LED indicator will blink 1 time and motor will beep 1 time)
Step 4: Set to 100% Throttle or Maximum speed (move your radio throttle stick FORWARD and ESC LED
indicator will blink 2 times and motor will beeps 2 times)
Step 5: Setting up of your BRAKE (move the radio throttle stick BACKWARD and ESC LED indicator
will
blink 3 times and motor will beep 3 times)
Step 6: When the LED light on your ESC blinks 4 times and the motor beeps 4 times, you have successfully
calibrated your Furitek esc
B.Calibrattion via App: (Your esc need a Bluetooth to communicate with app)
- Step 1: Please make sure to plug your battery to esc and open FURICAR app on android or IOS device
- Step 2: Please click “MENU” and click “THROTTLE”
*Follow intructions on the app screen till finish calibration
-100 -50 0 50 100
CALIB
Calib Throttle
Do you want to start Calib?
No Yes
BACKWARD FORWARDNEUTRAL POSITION
Choose Channel2 to connect Receiver to ESC main board: