Manual

www.furitek.com www.facebook.com/furitekelectronics [e-mail]
FURITEK MOMENTUM V2 Manual V1.0
Esc Manual calibration:
.Calibrattion via App: (Your esc need a Bluetooth to communicate with app)
- Step 1: Please make sure to plug your battery to esc and open FURICAR app on android or IOS device
- Step 2: Please click “MENU” and click “THROTTLE”
- Step 3: Please click ”CALIB” and then click “YES”
Bluetooth:
- Default password to connect via Bluetooth "1234"
*Change password:
- Step 1: Please make sure to plug your battery to esc and open FURICAR app on android or IOS device
- Step 2: Please Click the Setting icon (see picture)
- Step 3: Please Click ”Change Password” menu, a new window pops up, type your new password
and then click “OK”
Low speed:
- Step 1: Please make sure to plug your battery to esc and open FURICAR app on android or IOS device
- Step 2: Please click “MENU” and click “Advance”
- Step 3: Please Click “Low Speed” to select ON/OFF
*Follow intructions on the app screen till fishnish calibration
Setting
Common
Update Firmware
Change Password
Please type your password again
1234
Cancel OK
Change Password
Type your new password
Cancel
Your new password (4 numbers)
Confirm your new password
2 - 30
2 - 30
Decrease
Rate Turbo
Increase
Rate Turbo
0 - 100
*Timing Turbo value should be equal to or lower than (60
- TimingBoost)
(x10)
ms
Delay Turbo
Low Speed
-100 -50
0 50 100
CALIB
Calib Throttle
Do you want to start Calib?
No Yes
+-
30
Deg/
0.1s
Deg/
0.1s
+-
16
+-
10