Cyclos 20A Sensored Brushless ESC - Manual
www.furitek.com www.facebook.com/furitekelectronics sales@furitek.com
FURITEK MOMENTUM V2 Manual V1.0
Features:
- Support brushless DC and brushed DC motor (config via app, default is brushless)
- Designed for Micro Car 1/24, 1/27, 1/28 2WD or AWD or RWD
- 5.5V-1.5A Built-in BEC
- Mini size and light weight
- Super easy programming via App on Android and IOS
- Firmware update available (bluetooth module required)
- Real-time telemetry up to 10Hz
- Support 4xAAA/ 2s liPo battieres with automatic battery type recognition capability
- Professional parameter setup for many race tracks
- 3 running modes suitable for different types of RC cars
Specifications:
- Dimension (mm): 2 4(L)x12.4(W)
- Weight: about 2.1g
- Battery types: 4xAAA NiMH/2s liPo/ 2s LiOn
- Motor type: Sensorless Brushless DC / Brushed DC
- BEC output: 5.5V/1.5A
- Constant Current : 20A
- Burst Current : 40A
- Waterproof: NO
Pinout:
FURITEK MOMENTUM 2S LIPO/AAA NIMH 20A/40A
BRUSHLESS SENSORLESS ESC FOR DRIFT/RACE
Battery input:
Support 4xAAA / 2s liPo batteries
ON/OFF button
ESC Signal
Bat-
C B A
Bat+
Bluetooth
Motor output: Default (Brushless motor)
FURICAR
*DEFAULT configuration is Brushless motor, if you use BRUSHED motor, please
configure it as below:
- Step 1: Please make sure to plug your battery to esc and open FURICAR app on android or IOS device
- Step 2: Please Click the Setting icon (see picture)
- Step 3: Please click ”Motor Type” menu, a new window pops up, select “Brushless” or “Brushed”
and then click “OK”
Connect Brushed/Brushless motor to ESC:
Brushless motor to ESCBrushed motor to ESC
OR
ABCABCABC
x x
Configuration
Motor Type
Car Type
User Button
Brushless
Racing/Drift
None
Configuration
Please choose correct Motor Type
for device
Brushless
Brushed
Cancel OK
Configuration
Please choose correct Motor Type
for device
Brushless
Brushed
Cancel OK