Elite-16 PF E Manual Features ◊ Power Factor correction provides surplus current for power-starved amplifiers ◊ Linear Filtering Technology (LiFT) for unequaled audio / video clarity ◊ Series Multi-Stage Protection Plus (SMP+) for virtually maintenance-free AC surge suppression ◊ Zero ground contamination circuitry protects critical digital components ◊ Ultrasonic filtering isolates digital and video circuits from analog components ◊ Four pairs of TiVO friendly - High Definition ready cable/satellite loop t
Elite-16 PF E Manual Introduction For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. Though the need for pristine AC power is nothing new, the Elite-16 Power Factor’s technology and its unique implementation are revolutionary and without peer.
Elite-16 PF E Manual Installation: Unpacking Before unpacking your unit, inspect the carton for any obvious severe damage to the box and internal protective materials. If internal damage is likely, contact the carrier who delivered the unit before proceeding with unpacking. If, after unpacking, shipping damage is evident, contact the carrier. Save all shipping and packing materials. You may need them if you should ever have to return the unit to the factory for servicing.
Elite-16 PF E Manual E does not produce any appreciable heat under standard use. The Elite-16 PF E may also be rack mounted in a standard 19” (48.26 cm) rack by attaching the Elite-16 PF E rack ears. These rack ears (contained within the plastic rack kit package) mount flush with the back portion of the Elite-16 PF E’s front panel. They are attached to the chassis by installing each rack ear with (3) pan-head Philips screws contained within the Elite-16 PF E rack mounting kit.
Elite-16 PF E Manual continuous current draw may be limited to a range between 2900 - 3500 Watts per Elite-16 PF E employed. The RMS current available before the circuit breaker trips varies due to what is referred to as a vector load. Simply put, the type of power supplies or electronic circuits connected to the Elite-16 PF E will have an effect on its circuit breakers perceived current load, and therefore, when it will trip.
Elite-16 PF E Manual If this happens, some level of protection from voltage surges will remain, but the Furman’s clamping voltage rating will be compromised. The unit must be returned to Furman Sound, or an authorized Furman Service center for repair. Dimming the Protection OK Front Panel Indicator Some installations will require placement of this power conditioner within sight of your video screen.
Elite-16 PF E Manual Warranty Furman Sound, LLC. warrants to the original purchaser of this product, the Furman Elite-16 PF E, that the product will be free from defects in material and workmanship for a period of three years from the date of purchase. The purchaser of the product is allowed fifteen days from the date of purchase to complete warranty registration by mail or on-line at the Furman website.
Elite-16 PF E Manual or extension cords. Any such installation voids this warranty. The Furman warranty only protects against damage to properly connected equipment where Furman has determined, at its sole discretion, that the damage resulted from an Occurrence and does not protect against acts of God (other than lightning) such as flood, earthquake, war, terrorism, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to lowvoltage disturbances (i.e.
Elite-16 PF E Manual ELITE-16 PF E SPECIFICATIONS AC Current Capacity: Input - 16 Amp capacity required Output - 13-16 Amps RMS (maximum, all outlets combined - continuous) Linear Noise Attenuation: Transverse (Differential) Mode: >40 dB from 5Khz. - 100 kHz. >80 dB from 100 Khz. – 1GHz. (Linear attenuation curve from 0.05 – 100 ohms line impedance) Transient Voltage Surge Suppression: 230 VAC - Series Multi-Stage Protection - Non-Sacrificial with Zero Ground Contamination.
0512.21-B Furman Sound, LLC. 1690 Corporate Circle Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www.furmansound.com E-mail: info@furmansound.
