Elite 20 PF owner’s manual
Elite 20 PF owner’s manual The El i t e 2 0 P F F e a t u r e s • Power Factor correction provides surplus current for power-star ved amplifiers • Ultra-Linear Filtering for stunning audio/video clarity • Series Multi-Stage Protection Plus (SMP+) featuring Extreme Voltage Shutdown (EVS) • Zero ground contamination circuitr y protects critical digital components • Ultrasonic bi-directional filtering isolates each audio and video outlet bank • Retractable LED lamps illuminate a cabinet or rack full
Elite 20 PF owner’s manual Introduction For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. Though the need for pristine AC power is nothing new, the Elite-20 Power Factor’s technology and its unique implementation are revolutionary and without peer.
Elite 20 PF owner’s manual shake foundations with their weight and visceral impact. Mid and high frequencies will bloom with sweet, non-glaring ease while imaging improves dramatically, all the while remaining true to your system’s inherent virtues. Installation: Unpacking Before unpacking your unit, inspect the carton for any obvious severe damage to the box and internal protective materials. If internal damage is likely, contact the carrier who delivered the unit before proceeding with unpacking.
Elite 20 PF owner’s manual components. Placement or proximity to other components is not critical, and the Elite-20 PF does not produce any appreciable heat under standard use. The Elite-20 PF may also be rack mounted in a standard 19” rack by attaching the Elite-20 PF rack ears. These rack ears (contained within the plastic rack kit package) mount flush with the back portion of the Elite20 PF’s front panel.
Elite 20 PF owner’s manual 1900 - 2300 Watts per Elite-20 PF employed. Soft Start - Continuous Use and Break-In Time When power is first applied to the Elite-20 The RMS current available before the circuit PF, (the front panel breaker- power toggle breaker trips varies due to what is referred to must be switched to the “on” position) the Soft as a vector load. Simply put, the type of power Start feature is activated.
Elite 20 PF owner’s manual input voltage is above the extreme voltage cutoff, and power will not be applied to the unit’s outlets. If the unit has been operating with an acceptable input voltage and subsequently that voltage exceeds 137V, it will shut off power to the outlet and the Extreme Voltage LED will light. All in-line surge suppressors feature our exclusive ground contamination free technology.
Elite 20 PF owner’s manual Warranty: Furman Sound, Inc. warrants to the original purchaser of this product, the Furman Elite 20 PF, that the product will be free from defects in material and workmanship for a period of three years from the date of purchase. The purchaser of the product is allowed fifteen days from the date of purchase to complete warranty registration by mail or online at the Furman website.
Elite 20 PF owner’s manual depletion, obsolescence, abuse, damage due to low-voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. Do not use this product in anyway with a generator, heater, sump pump, water-related device, life support device, medical device, automobile, motorcycle, or golf-cart battery charger. To be used indoors only and in dry areas.
ELITE-20 PF SPECIFICATIONS AC Current Capacity: Input - 20 Amp capacity required Output - 16-20 Amps RMS * (maximum, all outlets combined - continuous) Linear Noise Attenuation: Transverse (Differential) Mode: >40 dB from 5 kHz. - 100 kHz. >80 dB from 100 Khz. – 1GHz. (Linear attenuation curve from 0.05 – 100 ohms line impedance) Transient Voltage Surge Suppression: 120 VAC - Series Multi-Stage Protection - Non-Sacrificial with Zero Ground Contamination.
