Power Conditioners Owner's Manual

SERIES II 15 AMP POWER CONDITIONERS
SPECIFICATIONS
Current rating:
15 amps (“E” versions 10 amps)
Operating Voltage:
90 to 140 VAC (“E” versions 180 to 260 VAC)
Over Voltage Shutdown:
140 VAC typically (“E” versions 260 VAC typically, “J”
versions 125 VAC typically)
Voltmeter Accuracy:
PL-PLUS II only: ±2 VAC, calibrated with internal
trimpot adjustments
PL-PLUSD & PM-8: ±1.5 VAC,
Current meter: ±0.5A
Spike Protection Modes:
Line to neutral, zero ground leakage
Spike Clamping Voltage:
188 Vpk @ 3,000 amps, (133 VAC RMS)
(“E” Version: 376 Vpk (266 VAC RMS)
Response time:
1 nanosecond
Maximum surge current:
6,500 amps
Noise attenuation:
10 dB @ 10 kHz
40 dB @ 100 kHz
100 dB @ 10 MHz
Linear attenuation curve from 0.05 - 100 ohms
line impedance
Mechanical:
Dimensions: 1.75” H x 19” W x 10.5” D.
Weight: 11 lbs (5 kg).
Construction: Steel chassis, .125” brushed and
black anodized aluminum front panel; glass epoxy
printed circuit boards
Power Consumption:
PL-8 II, 6 watts
PL-PLUS II, 12 watts
PL-PLUS D II, 12 watts
PM-8 II, 12 watts
Safety Agency Listings:
CE, NRTL-C
9
Make sure to pick up one of
Furman’s goosneck lights -
the perfect accessory
for your Series II unit.
GN-LED
GN-I
part of this Limited Warranty is determined to be
void or illegal, the remainder shall remain in full
force and effect.
S E R V I C E
Before returning any equipment for repair,
please be sure that it is adequately packed and
cushioned against damage in shipment, and
that it is insured. We suggest that you save the
original packaging and use it to ship the product
for servicing. Also, please enclose a note giving
your name, address, phone number and a
description of the problem.
NOTE: All equipment being returned for repair
must have a Return Authorization (RA) Number.
To get an RA Number, please call the Furman
Service Department: [phone], ext. 121.
Please display your RA Number prominently on
the front of all packages.