AC-215 / AC-210 E AC Power Conditioner Introduction Thank you for purchasing the Furman AC-215 / AC-210 E Power Conditioner. For over 30 years, Furman has pioneered the development and manufacturing of AC power products for the most demanding audio, video, and broadcast professionals. Furman’s Series Multi-Stage Protection Plus (SMP+) delivers the purest AC power and the most comprehensive protection available – going far beyond what is found in traditional surge strips.
AC-215 / AC-210 E AC Power Conditioner 2. Your unit should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, etc. 3. Do not place your unit near heat sources such as radiators, heat registers, stoves or other appliances that produce heat. 4. The unit should only be connected to a 120 VAC, 60Hz, 15 Amp [230 VAC and10 Amp for the AC-210 E] grounded electrical outlet.
AC-215 / AC-210 E AC Power Conditioner Indicators Extreme Voltage Shutdown Indicator The AC Series SMP+ circuit senses voltages that are high enough to cause damage to your components, and shuts the power down before damage can occur. The Extreme Voltage Shutdown LED is normally off. If an input voltage in excess of 137VAC [or 270 VAC for the AC-210 E] is sensed, either on initial power-up or during normal operation, the AC-215 / AC-210 E will shut off power and this indicator will light.
AC-215 / AC-210 E AC Power Conditioner Installation The AC-215 / AC-210 E can be conveniently and inconspicuously mounted within an equipment rack or on the rear panel of your video display, using the included brackets. Refer to the illustrations below for instructions. The brackets can be positioned facing in or out as shown to best allow for different types of installations.
AC-215 / AC-210 E AC Power Conditioner Warranty handling of the product; against defects or Furman Sound, Inc. warrants to the original purchaser of this product, the Furman AC-215 / AC-210 E, that the product will be free from defects in material and workmanship for a period of three years from the date of purchase. The purchaser of the product is allowed fifteen days from the date of purchase to complete warranty registration by mail or on-line at the Furman website.
AC-215 / AC-210 E AC Power Conditioner Service All equipment being returned for repair must have a Return Authorization (R/A) Number. To get an R/A number, please call the Furman Service Department at (707) 763-1010 ext 121, between the hours of 8:00 am and 5:00 pm US Pacific Time. When returning equipment for repair, please use the original packaging to ship the product. Also, please enclose a note giving your name, address, phone number, email address, and a description of the problem.
040105-B Furman Sound, Inc. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www.furmansound.com E-mail: info@furmansound.
