Confidence Monitor Systems Brochure

CONFIDENCE MONITOR
SYSTEMS
®
MODELS MS2A-1, MS2AD-1, MS4A-1,
MS4AD-1, MS2AV-1, MS2ADV-1
DESCRIPTION
When your livelihood depends on the integrity of an
electronic signal, a Furman MS Series Confidence Monitor can
FEATURES
l Six MS Series Confidence Monitor models:
MS2A-1 2 Channel, Analog Audio
MS2AD-1 2 Channel, Analog/Digital Audio
MS4A-1 4 Channel, Analog Audio
MS4AD-1 4 Channel, Analog/Digital Audio
MS2AV-1 2 Channel, Analog Audio, Video
MS2ADV-1 2 Channel, Analog/Digital Audio, Video
ALL MODELS
l High output magnetically shielded speakers
l Wide-range, high visibility, 14 segment meters with dimmer
and VU/PPM switch
l Selectable +4 dBu or +8 dBu meter reference
l High power, low distortion headphone amplifier
l Phase indicator
l Signal Present indicators on all input/output ports
l Speaker Mute switch
l Volume and Balance slide controls
l Universal 100-240 VAC agency listed external power supply
l Long life front panel mylar overlay
l Wide variety of models available, including SDI inputs
l Three year limited warranty
ANALOG/DIGITAL AUDIO MODELS
l Digital inputs conform to AES/EBU 75 ohm/BNCstandard
l Analog/Digital Select switch
VIDEO MODELS
l 1.8" color LCD TFT display auto senses NTSC/PAL
Furman Sound, Inc.
•
1997 South McDowell Boulevard
•
Petaluma, CA 94954 USA
Phone: [phone]
l
Fax: [phone]
•
Email: [e-mail]
•
Web: www.furmansound.com
®
give you blissful peace of mind. They provide assurance that
analog audio, digital audio, or video signals are present and
meet established quality standards before being broadcast,
recorded, or otherwise distributed. The various models differ
primarily in the types and number of signals they can monitor,
though all are housed in compact, single space chassis that
occupy minimal rack real estate. Monitoring is accomplished
audibly (through speakers or headphones) and visually
through meters and video monitors.
All models share many basic features and capabilities. A
pair of highly compact yet full range shielded stereo speakers
are built in, along with a Speaker Mute switch. An amply
powered TRS output is provided for headphone listening. The
speakers and headphone amplifiers share a Volume slide
control, and non-video models have Balance sliders. A Phase
indicator displays the phase relationship of the left and right
channels of the source being monitored. The indicator will
glow green to amber under normal conditions, and red during
conditions of total phase reversal, aiding in determining mono-
compatibility. Each input is routed to a bright, fourteen
segment LED meter, which may be switched for VU or PPM
ballistics and +4 dBu or +8 dBu reference levels with front
panel switches. Meter brightness may be adjusted with a
dimmer control, to suit user taste and variations in ambient
lighting. All front panel control and indicator labels are rear
printed on a heavy duty, wear-free mylar overlay. All analog
inputs and outputs are high common-mode rejection XLR
balanced, and each is provided with a rear panel signal activity
indicator for easy identification of system problems. Outputs
also have ±6 dB Gain Trim controls. The unit is powered with
an included UL-approved external power supply via a DIN 5
connector. For maximum reliability, it features a clean, modular
design with minimal cabling.
Models with digital monitoring capability are equipped with
an A/D Select button and both front and rear bi-color digital
signal activity indicator(s). The digital input(s) can accommo-
MS4AD-1
MS2ADV-1