Owner's Manual

6
authorized Furman Service center for repair.
Troubleshooting
Symptom: No power to the AC outlets.
Possible Cause: Circuit breaker has tripped due to excessive load.
Action Needed: Unplug one piece of equipment from the
AC-215 / AC-210 E, and push the re-set tab into the circuit
breaker bezel.
Symptom: No power to the AC outlets, even after the circuit breaker
has been re-set.
Possible Cause: Protection devices are damaged.
Action Needed: Contact the Furman Service Department
at 707-763-1010.
Installation
The AC-215 / AC-210 E can be conveniently and inconspicuously
mounted within an equipment rack or on the rear panel of your video
display, using the included brackets.