The PST-6 Owners Manual
Introduction Thank you for purchasing the Furman Power Station-6 Power Conditioner. For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. Furman’s Ground Contamination Free Surge Protection, Advanced Filtering Technology, and DigitalHD Television Ready circuitry can significantly improve your sensitive components while protecting them from spikes, surges and contaminated AC power.
Important Safety Instructions: 1. Please read and observe all safety and operating instructions before installing your Power Station-6 (PST-6). Retain these instructions for future reference. 2. Your PST-6 should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, etc. 3. Do not place your PST-6 near heat sources such as radiators, heat registers, stoves or other appliances that produce heat. 4.
• The power supply cord or the plug has been frayed, kinked, or cut. • Objects have fallen or liquid has spilled into the unit. • The unit has been exposed to rain or other moisture. • The unit does not appear to operate normally, exhibits a marked change in performance, or the Protection OK indicator is not lit. • The unit has been dropped, or the enclosure damaged. 8. Your PST-6 requires that a safety ground be present for proper operation.
circuit. In fact the bandwidth is less than 0.1dB loss at 1GHz! To connect your cabling to these in-line protectors, simply follow the in and out indications marked next to the Telco, and Cable / Satellite connectors. Note: It is not possible to make an in-line cable / satellite protector “maintenance-free.” Under extreme conditions, it is possible that the surge suppression in one of these devices could sacrifice itself after a catastrophic event.
product at a time until this no longer happens. If the breaker trips with no components connected, there may be a wiring defect that requires Furman service. Indicators Protection OK Indicator: Although Furman’s Ground Contamination Free Surge Suppression rarely requires servicing, nature has a way of occasionally creating electrical forces that are beyond the capabilities of any transient voltage surge suppressor device to absorb without some degree of damage.
Warranty Furman Sound, Inc., having its principal place of business at 1997 South McDowell Blvd., Petaluma, CA 94954 (“Manufacturer”) warrants its PST6 (the “Product”) as follows: Manufacturer warrants to the original Purchaser of the Product that the Product sold hereunder will be free from defects in material and workmanship for a period of one year from the date of purchase.
FOR A PARTICULAR PURPOSE. Manufacturer does not warrant against damages or defects arising out of improper or abnormal use of handling of the Product; against defects or damages arising from improper installation, against defects in products or components not manufactured by Manufacturer, or against damages resulting from such non-Manufacturer made products or components.
Service All equipment being returned for repair must have a Return Authorization (R/A) Number. To get an R/A number, please call the Furman Service Department at (707) 763-1010 ext 121, between the hours of 8:00 am and 5:00 pm US Pacific Time. When returning equipment for repair, please use the original packaging to ship the product. Also, please enclose a note giving your name, address, phone number, e-mail address, and a description of the problem.
Furman Sound, Inc. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www.FurmanSound.com E-mail: info@furmansound.