Submittal Sheet

ManualsBrandsFurnas Controls ManualsCircuit BreakersMotor Protection Circuit Breaker, 3 Poles, Thermal Overload, AC-3, Class 10 (4.5-6.3A, 690V)

Data sheet 3RV1011-1GA10

CIRCUIT-BREAKER SIZE S00, FOR MOTOR PROTECTION,

CLASS 10, A-REL. 4.5...6.3A, N-REL. 82A SCREW TERMINAL,

STANDARD SWITCHING CAPACITY

Product brand name SIRIUS

Product designation Circuit breaker

Design of the product For motor protection

Product type designation 3RV1

General technical data

Size of the circuit-breaker S00

Size of contactor can be combined company-specific S00

Product extension

● Auxiliary switch

Yes

Power loss [W] total typical 6W

Insulation voltage with degree of pollution 3 rated

value

690V

Surge voltage resistance rated value 6kV

maximum permissible voltage for safe isolation

● in networks with grounded star point between

main and auxiliary circuit

400V

● in networks with grounded star point between

main and auxiliary circuit

400V

3RV1011-1GA10 Subject to change without notice

Page 1/

Summary of content (7 pages)

PAGE 1
Data sheet 3RV1011-1GA10 CIRCUIT-BREAKER SIZE S00, FOR MOTOR PROTECTION, CLASS 10, A-REL. 4.5...6.3A, N-REL.
PAGE 2
Protection class IP ● on the front IP20 ● of the terminal IP00 Mechanical service life (switching cycles) ● of the main contacts typical 100 000 ● of auxiliary contacts typical 100 000 Electrical endurance (switching cycles) ● typical 100 000 Type of protection Increased safety Protection against electrical shock finger-safe Equipment marking acc.
PAGE 3
Number of CO contacts ● for auxiliary contacts 0 Protective and monitoring functions Product function ● Ground fault detection No ● Phase failure detection Yes Trip class CLASS 10 Design of the overload release thermal Operational short-circuit current breaking capacity (Ics) at AC ● at 240 V rated value 100 000 A ● at 400 V rated value 100 000 A ● at 500 V rated value 3 000 A ● at 690 V rated value 2 000 A Maximum short-circuit current breaking capacity (Icu) ● at AC at 240 V rated value
PAGE 4
Product function Short circuit protection Yes Design of the short-circuit trip magnetic Design of the fuse link for IT network for short-circuit protection of the main circuit ● at 240 V none required ● at 400 V gL/gG 50 A ● at 500 V gL/gG 40 A ● at 690 V gL/gG 40 A Installation/ mounting/ dimensions Mounting position any Mounting type screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 Height 90 mm Width 45 mm Depth 81 mm Connections/Terminals Produc
PAGE 5
Failure rate [FIT] 50 FIT ● with low demand rate acc. to SN 31920 Display version Rocker switch ● for switching status Certificates/approvals General Product Approval Declaration of Conformity Test Certificates For use in hazardous locations Marine / Shipping Special Test Certificate Marine / Shipping other Confirmation Miscellaneous Further information Information- and Downloadcenter (Catalogs, Brochures,…) http://www.siemens.