Align the FB legs (#4) to the holes along the bottom of the side rails (#2), then insert a bolt (#A) with lock washer (#D) and flat washer (#E) into each hole. Secure using the Allen wrench (#G). 1. Align each end of the side rails (#2) to the holes along the headboard (#1) and foot board (#3) 2. Insert a bolt (#B) with lock washer (#D) and flat washer (#F). Insert into the holes from within and secure using the Allen wrench (#G).
1. Prepare 3 bolt assemblies by first inserting a lock washer (#D) onto the bolt (#C) then a flat washer (#E) onto that same bolt (#C). 2. Align the support legs (#5) to the holes along the center support rail (#6). Insert a bolt into each hole from above. Secure using the Allen wrench (#G). 1. Align each end of the center rails (#6) to the holes along the side rails (#2). 2.
Align the FB legs (#4) to the holes along the bottom of the side rails (#2), then insert a bolt (#A) with lock washer (#D) and flat washer (#E) into each hole. Secure using the Allen wrench (#G). 1. Align each end of the side rails (#2) to the holes along the headboard (#1) and foot board (#3) 2. Insert a bolt (#B) with lock washer (#D) and flat washer (#F). Insert into the holes from within and secure using the Allen wrench (#G).
1. Prepare 8 bolt assemblies by first inserting a lock washer (#D) onto the bolt (#C) then a flat washer (#E) onto that same bolt (#C). 2. Align the support legs (#5) to the holes along the center support rail (#6). Insert a bolt into each hole from above. Secure using the Allen wrench (#G). 1. Align each end of the center rails (#6) to the holes along the side rails (#2). 2.