Assembly Instructions ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating isa B-point system that shows the degree of effort needed in assembling a specific product (with 1 being ini § Te easy and & being difficult. Formosa Philips Screwdriver ot studied) products, two persons are recommended.
90-DAY LIMITED REPLACEMENT PARTS WARRANTY This Stem comes with a 90-day limited replacement parts warranty to the original purchaser of new products against defects in materials and workmanship for a period of ninety (90) days from the date of receipt.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST, CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES Hyde highly recommended halt assembly Should BE Dane nerd the arts of fs intended location. Make Sif yeu Have headlight Space To move arid during the assembly ALLAYS have 81 sas in people te Bast with reins porting And unblushing {hie protract ta avid any potential infancy landlord damage.
PER-ASSEMBLY INTRODUCTION Unless your are particularly adept at assembling flat-antiknock-down furniture ‘we understand building ready-to-assemble failure bean frustrating experience for some. To help avoid confusion and to make the assembly process quicker and smoother, we have provided some helpful tips. Before you begin the assembly.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note: Every cam lock bolt must have a sam lock connector in order to fasten the parts together, {1) Align the cam connector with its Secure the threaded i side opening {or arrow) end of the cam bolt pointing to the small busing a drilled hole. S screwdriver. Turn right (clockwise) to tighten, Two parts should fit snugly 3) against each other. Insert the cam lock bolt into the per-drilled hole above the cam connector.
Get Ready Please group boards as below @PCs BPC @pe © PCs ETT @® PCS @IPC @1pPc PCS @1Pc © 1PC W1Pc Doors /Shelf Page 7of 20
ASSEMBLY INSTRUCTIONS STEP : 1 Hardware (1D) x22PCS Hardware 3 x26PCS Hardware (8 PCs Hardware PCs Hardware (7) x1PC Apply a dab of glue to dowel holes before inserting dowels Page 8 of 20
ASSEMBLY INSTRUCTIONS STEP: 2 Hardware (1) x PCS Dowel hole Hardware (3) x PCS Hardware (8) x PCS a .
ASSEMBLY INSTRUCTIONS STEP: 20 Insert non-spring assisted pin (#11) into the hole of the unit first before the spring assisted pin STEP: 21 Hardware {8 x 1PC Hardware (6) x PCS Page 18 of 20
ASSEMBLY INSTRUCTIONS STEP: 22 Hardware {7 x PCS Hardware 9 x 1PC STEP: 23 Hardware X12PCS Hardware (0) x12PCS Insert fixative plates (#10) throughout the grooves of the back panels, then secure by using screws Page 19 of 20
ASSEMBLY INSTRUCTIONS STEP : 24 Hardware 0 x 1PC Hardware @) x 1PC Hardware 3 x 1PC Hardware G4 x PCS Hardware 3x 1PC 774 [RTI TT Make sure the unit is rested on a flat surface and does not feel loose or wobbly.