ASSEMBLY INSTRUCTIONS VERSION # 19-06-10 TOOLS REQUIRED Hammer {Nat Included) Philips Screwdriver (Mot included) Persons Recommended 00060 EASY min FFI ULT The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories listed on Page 8 are accounted for. Should we send any replacements? Are there any irregularities or flaws in the pans? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts ends a refresher flow and then! Prep Time! Please review the assembly instructions and all diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or marriage. Suitable Location Assembling near the ares of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Turn clockwise to tighten and only tighten when step is completed ar when instructed {0 do so. Position each part correctly and insert resews or bolts into their respective holes. Lisa the appropriate hand tools or power tools for assembly Select steps, such as tightening straws and/or bolts; may require hand tools to avoid causing carnage during assembly.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note Every sam lock bolt must have a cam 0 look connector in order to fasten the parts Together. cam bolt cam lock screwdriver j1 — Resew the cam insert the cam bolt into the bait into panel bolt hole of joint panel. Align the cam lock with its side opening Turn the eam lock clockwise veritably {or arrow} pointing 16 cam bolt. until it will mot fun Bry more.
ASSEMBLY INSTRUCTIONS 1 Hardware (2) x CAPS Apply & dab of glue into dowel holes of panels before Inserting dowels (72). n s 2 Part @ x1PC Part {§ PCS Hardware (f) x PCS Use the provided Tier (#42) to. cover poser i screws.
ASSEMBLY INSTRUCTIONS 3 Part £3 x1PC Hardware (T)x PCS ’ Accessory (AZ) X PCS Use tha provided ’ he stinkers (KA2) 10 ay cover exposed Screws. Accessory (AB) x PCS . .
ASSEMBLY INSTRUCTIONS © Keep this handy! Please retain this constriction mania and any order-related information for future reference 10410