FOA Intro Thank you for your purchase! We hope you enjoy this new addition to your home for many years to come. Our commitment to providing quality products does not simply end when you purchase our product. We fully stand behind our products from start to finish. Our customer service department is available Monday โ Friday 8:30 AM โ 5:30 PM Pacific and can help with assembly questions as well as, if necessary, replacing damaged or missing parts.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Turn clockwise to tighten and only tighten when step is completed or when instructed to do so. Position each part correctly and insert screws or bolts into their respective holes. Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note : Every cam lock bolt must have a cam lock connector in order to fasten the parts together. cam bolt cam lock screwdriver 1 2 Screw the cam bolt into panel. Insert the cam bolt into the bolt hole of joint panel. 3 4 Align the cam lock with its side opening (or arrow) pointing to cam bolt. Turn the cam lock clockwise gently until it will not turn any more.
MINI BAR A HFW-1979C25 E I J G PARTS A 1PC B 1PC C 1PC F 1PC G 1PC H 1PC I 1PC N 8PCS O 2PCS P 1PC Q 2PCS J 1PC D 1PC K 2PCS HARDWARE 1 10PCS 2 10PCS 3 18PCS (8x30) 5 26PCS 6 2SETS 2.2" 7 8PCS 0.5" L 2PCS M 2PCS ACCESSORIES 4 18PCS A1 2PCS A2 2PCS(Lock) A3 2PCS A4 16PCS A5 2SETS A6 1SET (8x50) 8 4SETS 0.5" 0.6" spring 9 4SETS E 1PC 10 12SETS A7 18PCS 0.
Make sure the orientation of the panels (#N) are correct based off the diagram.
ASSEMBLY COMPLETED Please ensure the furniture rests on an even and flat surface. If the product wobbles or feels loose, double-check all bolts and/or screws are properly tightened and secured. Keep this handy! Please retain this instruction manual and any order-related information for future reference. Lift, donโt drag! To avoid damage to product please always LIFT the product when transporting of adjusting the placement.
