Assembly Instructions General Sofa/Loveseat/Chair Leg Installment Guide {Product with No Pr-drilled Holes) ~ Fed (Sample age. Image may not mach your particular terms} ASSEMBLY RATING The Assembly Rating Is a S-point system that shows the degree of effort needed in assembling a specific. product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST.CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES Her lock or aping washer is used in Position gah part coevally and insert.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed. PARTS LIST HARDWARE LIST #1 PCS #A BPS ISS Leg om Screw {Legs may be tangles or squares) The amount of legs and screws that have no-prevailed holes to align to may vary depending on unit.
I. Carefully place the seat face down onto a protected surface. Il. Remove the wooden blocks from each corner of the seat. “ee # “Carpi win © JE If there are no wooden blocks on each corner of the seat, then move onto step 2. * A sine ETT Place the legs (#1) onto each corner of the seat and measure 1/4 Inchon each side of the leg.
insert 2 screws (HA) into each leg ; z 7 alt § (Emotionalized) using power tool. Prepare power tool. Choose the appropriate type Phillip head for the screw. Use the power tool and align the screw perpendicular to the stir face. Gently pull trigger and then accelerate until secured. Carefully tit the completed seat upright. Make sure the seat is rested ona flat surface and does hot feel lose or Tu wobbly. 1 it dis, double > check that the bolts are.
If using screwdriver. Choose the appropriate type of Phillips screw driver to the screw. Use the screwdriver and align the screw perpendicular to the surface. Secure the legs onto seat by applying pressure on the screwdriver with screw into the seat frame. This will require great force, Do no continue when hands or arms ache. Carefully turn the completed to seat upright: Make sure the h seat is rested on a flat surface > anacondas not feel loose of * wobbly.