Assembly Instructions ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench assembling a specific product (with 1 being (Included) easy and 5 being difficult). For seem products, two persons are recommended.
96-DAY LIMITED REPLACEMENT PARTS WARRANTY This item comes with a 90-day limited replacement parts warranty to the original purchaser of new products against defects in materials and workmanship for a period of ninety (90) days from the date of receipt. This warranty is not transferable.
Before you begin, please read Page 3 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed.
#AX 2 pes #B x 2 pcs Turn right {clockwise; to tighten #D x 2 pes HE = I. Place the backrest with legs oie #8 © (#1) on a protected surface. Align the seat (#2) with the per-drilled holes of the backrest with legs Il. Prepare 2 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt (#D) and then the flat washer (#A) onto the SAME bolt in £ that order. Hl.
#Ax 4 pes I. Insert the front leg support (#7) ® x pes between the right front leg (#3) Xa 0cs and the left front leg Note: Right.and left are Il. Insert the right leg support (#5) determined by facing the front of and the left leg support (#6) into the chair in the upright position. the backrest with legs (#1) and the other ends of the leg supports into the assembled right front leg (#3) and the left front leg .