Align a leg (#2) to each side of the leg frame (#1), then insert 2 bolts (#A) into each end. Secure using the Allen wrench (#D). Align the holes along the bottom ring (#3) to the holes along the legs, then insert a bolt (#B) into each hole and secure using the Allen wrench (#D).
Align the holes along the center ring (#4) to the holes along the outer part of the legs, then insert a bolt (#B) into each hole and secure using the Allen wrench (#D). 1. Place the seat (#5) face down, then align the metal plate and pole (#6) to the holes along the bottom of the seat. 2. Insert a bolt (#B) into each hole and secure using the Allen wrench (#D).
Place the leg frame upright, then insert the metal pole (#6) into the top center hole. Turn right to tighten. Place a flat washer (#C) onto the bolt (#A) then insert the bolt assembly into the hole at the end of the metal pole (#6). Secure using the Allen wrench.
