ASSEMBLY INSTRUCTIONS VERSION # 20-08-05 TOOLS REQUIRED Allen Wrench (included) A 2 Persons Recommended P 00:C0 EASY DIFFICULT The Assembly Rating is a S-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories sifted on Page 6 are accounted for. Should we send any replacements? Are there any irregularities or flaws in the pairs? We can send replacements! Check out our Quick Tips! We recommendation reviewing the per-assembly handouts, Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior o & holing.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-brasserie furniture can be a challenging competences for some. To help avoid confusion, we have provided some helpful tips that may speed up the process., Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage.
ASSEMBLY AND CARE ADVICE C FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. \ Turn clockwise 1o tighten and only tighten when step is completed or when instructed 1o do so. Position each part correctly and insert screws or bolts into their respective holes Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening resews and for bolts, may require hand tools to avoid causing damage during assembly.
ASSEMBLY INSTRUCTIONS 1 Align cross frames (#2) to feg frame then Part @) x1pc Part @3 tocsins Hardware@) apes / secure by using bolts 2 Part @) x1pc Hardware apexes A Align cross frames (#2) to leg frame then source by using bolts 6/9
ASSEMBLY INSTRUCTIONS 3 Part @ expel Hardware@B) xdpcs Hardware@c) capes Align frame to the top then secure by using bolts (#B) with washers 4 Hardware@ PCs Attach levelers (#D) 1o the bottom of the Jeg frames 7/9
ASSEMBLY INSTRUCTIONS == EXPANSION WALL ANCHOR Our provided expansion wall anchors are only suitable for masonry walls, such as drywall, piaster or concrete, and are best for holding lightweight items or for anti-tip prevention. if you are unsure of the correct wall anchor to use with the product, please request professional guidance. liability for product damage or failure due io using the incorrect anchors will fall on the installer.