ASSEMBLY INSTRUCTIONS VERSION # 20-08-07 TOOLS REQUIRED = Allen Wrench (included) 2 People Recommended 00:0 EASY DIFFICULT The Assembly Rating is a S-paint system showing the feel of effort needed fo assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories sifted on Page 6 are accounted for. Should we send any replacements? Are there any irregularities or flaws in the pairs? We can send replacements! Check out our Quick Tips! We recommendation reviewing the per-assembly handouts, Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior to a piling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-brasserie furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful dips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. \ Turn clockwise to tighten and only tighten when step is completed or when instructed to do so. Position each part correctly and insert screws or bolts into their respective holes Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and for bolts, may require hand tools to avoid causing damage during assembly.
ROUND SIDE TABLE « Please keep inclinations for fut preens, = Shack the quantity smd irregularity of parts and hardware bis lore pou sla, Gail @D 1pc #2) 1pc PCs Co Top Frame Bottom Frame Leg Frame (#4) 1pc ( Glass gE RTE PCs #8) PCs #0 PCs gu mmm Bolt 1/4" * 12mm Bolt 1/4" * 21mm Plug PCs 1pc Rubber Mat Allen Wrench 547
ASSEMBLY INSTRUCTIONS 1 Align leg frames (#3) to the top frame thin secure by sing bolts Part@) x1pc Part 3 PCs Hardware) pests fo 2 Part @ x1pc Hardware@8) apexes Align bottom frame (#2} 10 the legs. then secure by using bolts #8).
ASSEMBLY INSTRUCTIONS 3 Hardware C) PCs Attach plugs (#C) to the bosom of the legs. 4 Part @ ripe Hardware@D) PCs Attach rubber mats (#D) to the tabs, then place top ($4) onto the unit.