Assembly Instructions

2. Insert a screw (#G) into
each end of the cross-
bar (#3). Secure using
a Phillips screwdriver.
1. Align the crossbar (#3)
to the opening side of
the seat frame (#1).
1. Insert 4 threaded rods
(#A) into the holes along
each arm (#5) and turn
right to tighten.
2. Insert the other ends
of those threaded rods
(#A) into the holes
along the sides of the
seat frame (#1).
3. Insert a flat washer
(#D) then a hex nut
(#C) onto the threaded
rods (#A) and secure
using the wrench (#B).