Assembly Instructions SCAN TO SEE ASSEMBLY VIDEO Or follow this fink: pith: tout pelwCIQHSHICE ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being Wrench j— easy and 5 being difficult). For some {included} products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in Position each part correctly and insert an assembly, please make sure the screws or bolts into their respective ick or spring washer is placed holes by hand tighten or using the between the larger flat washer and the proper hand tool.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#A x PCs #C x PCs #D x PCs 1. Insert 2 bolts into each ear turn right to tighten. I. Facing the back, align the ears (#4) to the per-drilled holes along the sides of the backrest Insert the ends of the bolts . Onto each bolt end insert a flat washer (#D) and then a hex nut (4G). Secure each by using the wrench #A x PCs #C x PCs #D x PCs Insert 3 bolts (#A) into the Back bottom of the backrest tum right to tighten. .
#E x PCs #1 Bottom Carefully place the chair onto a protected surface. Inserts gasket (#E) onto the threaded ends of each leg Insert the legs (#6) into the per-drilled holes on the bottom of the seat and turn right to tighten. Place pillows. Make sure all parts are firmly secured.