Instructions / Assembly

Page 5 of 17
(1)
(2)
(3)
(4)
Secure the threded
end of the cam bolt
by using a
screwdriver.
Note:Every cam lock bolt
must have a cam lock
connector in order to
fasten the parts together.
Align the cam connector with its
side opening (or arrow)
pointing to the small
driIIed hole.
Tun right (clokwise) to tighten.
Insert the cam lock
bolt into the
pre-drllled hole
above the cam
connector.
Turn right(clockwise) to tighten.
Two parts should fit snugly
against each other.
Turn the cam connector with a
screwdriver until it will not turn
any more with light to moderate
force.