Assembly Instructions Tools Required for Assembly: ASSEMBLY RATING The Assembly Rating is a 5-point system that] shows the degree of effort needed in assembling a specific product {with 1 being Phillips Screwdriver easy and 5 being difficult). For most 112" (Not Included) products, two persons are recommended.
90-DAY LIMITED REPLACEMENT PARTS WARRANTY This item comes with a 90-day Limited replacement parts warranty 1o the original purchaser of now products against defeats in materials and workmanship for a period of ninety (90) days from the date of receipt. This warranty is not transferable.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES @ highly recommended that the Position each part correctly and insert Use cardboard or carpet area when assembly should be done near the screws or bolts into their respective assembling furniture to prevent area of its intended location.
PER-ASSEMBLY INTRODUCTION Unless you are particularly adept at assembling furniture, we understand building ready-to-assemble furniture can be a frustrating experience for some. To help avoid confusion and to make the assembly process quicker and smoother, we have provided some helpful tips. Before you begin the assembly, please read the following : 1.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note:Every cam lock bolt must have a cam lock connector in order to fasten the parts together. Align the cam connector with its side opening (or arrow) end of the cam bolt pointing to the small by using a > drilled hole. screwdriver. b NGA Tun right (clockwise) to tighten. (1 ) Secure the threaded (2) (3) Two parts should fit snugly 1 Insert the cam lock against each other. bolt into the per-drilled hole l 3 above the cam @ connector.
Ipc 1pc Ipc 1pc PARTS LIST 6 lpc | (0 apes | (8) 1pc | © 1pc Before you begin,please read"Assembly and Care Introduction"and "Cam Lock Fastener Assembly Instructions".
HARDWARE LIST A GETS 1.29 pcs B g ®15 apes C es $22 Bros D EB P8x25 apes E Eom M7x48 apes F S d8x 16x2 apes G = 250mm apes H Eo 4x16 apes 1 #4x30 PCs J 388 $15 pes K (Emo ®5%50 poss L 45x18x15 pes M LTE 8x40 pes Glue: For securing please apply N aY 10 wood dowel first before 1pc inserting into panel Due fo the size and/or weight of this product,it is highly recommended that the assembly should be done near the area of its intended location.Make sure you have enough space to move around during the assembly.
ae ALL Draw a line the length of support bar.
ae ALL For extra stability, if you have a drill bit, you can insert enclosed threading into the studs before the S Crews. Secure panel to wall at marks made. Note the slant. sof Evenly Distributed Hook slant panel on the back of cabinet on top of the slant panel on the wall.
ASSEMBLY INSTRUCTIONS { iD ed AMA Attach L bracket beneath bottom panel of cabinet and center stud.