CM4630 3PK

Page 6 of 7
I. Carefully place the coffee table
top (#1) facing down on a
protected surface. Align the 4
legs (#3) with the pre-drilled
holes on the bottom corners of
the coffee table top (#1).
II. Prepare 8 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#A) and then
the flat washer (#C) onto the
SAME bolt (#A), in that order.
III. Insert the bolt assemblies
through the pre-drilled holes on
the corners of the coffee table top
(#1) and secure those bolts using
the Allen wrench (#E) to lock
them with the legs (#3).
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I. Align the coffee table shelf (#2)
with the pre-drilled holes on the
legs (#3).
II. Insert 4 screws (#D) into the
coffee table shelf (#2) using the
Phillips screwdriver to lock
them with the legs (#3).
III. Carefully turn the completed
table upright. Make sure the
table is rested on a flat surface
and does not feel loose or
wobbly. If it does, double
check that the bolts are
secured and properly tightened.
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
#D x 4 pcs
#3
#3