ASSEMBLY INSTRUCTIONS YNJ-1409 ASSEMBLY RATING The Assembly Rating is a 5-point system that show the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For most products, two persons are recommended.
Thank you for your purchase! We hope you will enjoy your new product for many years to come. Our commitment to providing quality products does not simply end when a purchase is made. We stand behind our products and will provide any support needed in order for you to fully enjoy your purchase. Your satisfaction is the greatest recognition we could have. Because we value your trust in our company, we will do our best to meet your service expectations.
Page 3 of 10
PRE-ASSEMBLY INTRODUCTION Unless you are particularly adept at assembling flat-pack/knock-down furniture, we understand building ready-to-assemble furniture can be a frustrating experience for some. To help avoid confusion and to make the assembly process quicker and smoother, we have provided some helpful tips. Before you begin the assembly, please read the following: 1. 2. 3. 4. 5. 6. 7.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS ly Page 5 of 10
SHOE CABINET ASSEMBLY INSTRUCTIONS MODEL # YNJ-1409 Please keep for future reference PARTS LIST 33.47" (W) A H 1PC B 1PC I 2PCS D B 47.24"(H) A 1PC C 1PC C J 1PC H G D 1PC 15 K 1PC I .85 " (D E 1PC ) DIMENSIONS 33.47”(W) X 15.85”(D) X 47.24”(H) F 4PCS Before you begin, please read “Assembly and Care Advice”, “PreAssembly Introduction” and “Cam Lock Fastener Assembly Instructions”.
ASSEMBLY INSTRUCTIONS STEP1 Hardware #1 = 16pcs Hardware #3 = 4pcs Hardware #9 = 8pcs 1 9 3 C D STEP2 Hardware #2 = 22pcs After inserting wood dowels (HW #2) into the panels, assemble Part #J onto Part #B and assemble two Part #I onto Part #E.
ASSEMBLY INSTRUCTIONS STEP3 Hardware #8 = 16pcs D 1 8 J I B A E I C STEP4 Hardware #4 = 16pcs F 4 Page 8 of 10
ASSEMBLY INSTRUCTIONS STEP5 Hardware #9 = 8pcs 9 G H STEP6 Hardware #5 = 40pcs Hardware #6 = 4pcs K K 5 ⑥ With the help of another person, carefully place the unit upright. Make sure the unit is rested on a flat surface and does not feel loose or wobbly. If it does, double check all bolts/screws are secured and properly tightened.
HINGE ADJUSTMENT Height Adjustment Two screws, located at the top and bottom of the hinge, mount the hinge to the cabinet. Turn these first to make sure the door is secure. If the door is still too high or low, loosen these screws slightly and then lift or lower the door until it is in the position you want. Firmly tighten the screws to secure the door. Remember to support the door as you loosen these screws or it could drop completely out of its initial position.