SHLF1, SHLF181, SHLF301 UNIT WEIGHT: 18" (4.2 lbs) 24" (5 lbs) 30" (5.
Furniture Pipeline Fastening System Each and every piece of our furniture uses a simple, yet effective fastening system to quickly assemble & adjust. The premise behind the system is the use of a set screw that "clamps" on to each pipe trapping it in place . Each fitting has a pre-inserted set screw as EACH pipe entry location (spare set screws are provided).
10.00 4.00 VARIES* (18", 24", 30") 1.
DISCLAIMER: Furniture Pipeline LLC intends to make this instruction manual accurate and complete. However, Furniture Pipeline LLC makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
[x1] Shelf Assembly [x2] Flange 1 2 [x2] Cap [x1] 1/8" Allen Key 3 4 [x4] Ø8mm X 40mm lg.
1 2 2 3 1 3 USE 4 TO TEMPORARILY TIGHTEN FLANGE'S SET SCREWS USE PART 4 & TIGHTEN THE CAP'S SET SCREWS 2 1. PLACE THE UNIT IN DESIRED LOCATION AGAINST WALL WHILE LINING EITHER THE RIGHT OR LEFT FLANGE WITH A WALL STUD. 2. LIGHTLY MARK YOUR WALL USING A PENCIL THROUGH THE FLANGE SCREW HOLES ( 4 MARKS NEEDED TOTAL). 3. REMOVE UNIT FROM WALL AND PREDRILL YOUR 4 MARKED SPOTS USING A 1/4" DRILL BIT. 4. LOOSEN FLANGE SET SCREWS AND REMOVE FLANGES FROM UNIT.
3 IMPORTANT: TO INSURE PROPER AND SAFE INSTALLATION OF YOUR SHELF; YOU MUST: 1. PLACE THE UNIT IN DESIRED LOCATION AGAINST WALL LINING AT LEAST ONE SIDE UP WITH A STUD. 2. LIGHTLY MARK YOUR WALL USING A PENCIL IN EACH MOUNTING HOLE ON THE FLANGES. 3. REMOVE UNIT FROM WALL AND PREDRILL YOUR 4 MARKED SPOTS USING A IF NOT GOING DIRECTLY INTO STUD, USE ANCHOR (ITEM 7). DRILL 3 " DRILL BIT 16 5 " HOLE AND HAMMER 16 ANCHOR INTO PLACE. 4.
WARRANTY Finishes of Pipes and Fittings, and all Other Parts and Components, Excluding Wood -1 Year Limited WarrantyAll metal finishes and other parts and components, excluding wood, are warranted by Furniture Pipeline LLC to you, the original retail purchaser, for a one-year period starting from the date of purchase, to be free from material manufacturing defects.
WARRANTY CONT... FINISHES AND ALL OTHER PARTS AND COMPONENTS EXCLUDING WOOD – 1 YEAR SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, THEREFORE, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. DISCLAIMER NO OTHER EXPRESS WARRANTY HAS BEEN MADE OR WILL BE MADE ON BEHALF FURNITURE PIPELINE LLC, WITH RESPECT TO THE FURNITURE AND ITS PARTS, OR THE OPERATION, REPAIR, OR REPLACEMENT OF THE FURNITURE AND ITS PARTS.
WARRANTY CONT... Claims If a problem should arise which you feel is covered by our Limited Warranty, contact the Furniture Pipeline LLC authorized retailer from whom you purchased your furniture. The original bill of sale and the product serial number are necessary for the fulfillment of the warranty. Please make sure any claim for warranty service is accompanied by the necessary information to satisfy the warranty requirements.
