SCS1-WIS Ave UNIT WEIGHT: 60.
64.00 32.00 L-BRACKET DISTANCE 12.00 12.00 48.000 13.50 72.50 13.50 13.50 13.50 5.
DISCLAIMER: Furniture Pipeline LLC intends to make this instruction manual accurate and complete. However, Furniture Pipeline LLC makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
[x2] Left Leg Assembly [x2] Right Leg Assembly 2 1 [x12] Vertical Leg Support [x3] Shelf 3 [x3] Shelf Support 5 4 [x3] Shelf Support 6 [x1] Support Shelf (L-Brackets attached) [x2] Vertical "L" Support [x2] Vertical "L" Support 7 8 9 NOTE: SMALL ADJUSTMENTS MAY BE NEEDED ON SUBASSEMBLIES DUE TO SHIPPING MOVEMENT SCS1 4
[x6] Cap [x1] Top Shelf 10 11 [x1] Left Wall Support [x1] Right Wall Support 12 13 [x1] 1/8" Allen Key Smaller Key [x1] 1/4" Allen Key Larger Key 15 16 [x8] Ø8mm X 40 mm lg.
NOTE: For Steps 1-5, Furniture Pipeline recommends turning unit on its side for assembly; illustrations are for reference.
4 2 4 4 4 FROM STEP 1 USE PART 15 & TIGHTEN SCS1 7
3 7 (WITH BRACKETS) 5 4 4 6 4 4 3 6 5 FROM STEP 2 USE PART 15 TO TIGHTEN ALL NEW CONNECTIONS SCS1 8
4 10 8 8 9 3 9 5 4 6 4 4 FROM STEP 3 SCS1 9 4
4 cont...
12 5 11 13 11 FROM STEP 4 USE PART 15 TO TIGHTEN ALL CAPS 1 USE PART 15 TO TIGHTEN BOTH SIDES SCS1 11
6 IMPORTANT: TO INSURE PROPER AND SAFE INSTALLATION OF YOUR BOOK CASE, YOU MUST: 1. PLACE THE UNIT IN DESIRED LOCATION AGAINST WALL WHILE LINING EITHER THE RIGHT OR LEFT FLANGE WITH A WALL STUD. 2. LIGHTLY MARK YOUR WALL USING A PENCIL THROUGH THE FLANGE AND L-BRACKET SCREW HOLES (8 MARKS NEEDED TOTAL). 3. REMOVE UNIT FROM WALL AND PREDRILL YOUR 8 MARKED SPOTS USING A 3/16" DRILL BIT. 4.
DONT FORGET TO TIGHTEN L-BRACKETS INTO STUD! 3RD SHELF FROM BOTTOM USE PART 16 TO TIGHTEN BRACKETS INTO WALL STUD IMPORTANT: FAILURE TO PROPERLY SECURE TO WALL MAY RESULT IN SERIOUS INJURY SCS1 13
WARRANTY Finishes of Pipes and Fittings, and all Other Parts and Components, Excluding Wood -1 Year Limited WarrantyAll metal finishes and other parts and components, excluding wood, are warranted by Furniture Pipeline LLC to you, the original retail purchaser, for a one-year period starting from the date of purchase, to be free from material manufacturing defects.
WARRANTY CONT... FINISHES AND ALL OTHER PARTS AND COMPONENTS EXCLUDING WOOD – 1 YEAR SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, THEREFORE, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. DISCLAIMER NO OTHER EXPRESS WARRANTY HAS BEEN MADE OR WILL BE MADE ON BEHALF FURNITURE PIPELINE LLC, WITH RESPECT TO THE FURNITURE AND ITS PARTS, OR THE OPERATION, REPAIR, OR REPLACEMENT OF THE FURNITURE AND ITS PARTS.
WARRANTY CONT... Claims If a problem should arise which you feel is covered by our Limited Warranty, contact the Furniture Pipeline LLC authorized retailer from whom you purchased your furniture. The original bill of sale and the product serial number are necessary for the fulfillment of the warranty. Please make sure any claim for warranty service is accompanied by the necessary information to satisfy the warranty requirements.
