4.3” Vision S Camera System Système de caméra Vision S de 4.3 po Sistema de cámara Vision S de 4.3” Instruction Manual Manuel d’instructions Manual de instrucciones * The packing contents may be different based on the kit you purchased. Please take the actual product as standard. * Le contenu de l’emballage peut être différent en fonction de la trousse achetée. Veuillez prendre le produit réel en référence. * Es posible que los contenidos del embalaje sean diferentes según el kit que haya comprado.
Welcome Thank you for purchasing this Furrion® Vision S Camera System. Before operating your new product, please read these instructions carefully. This instruction manual contains information for safe use, installation and maintenance of the product. Please keep this instruction manual in a safe place for future reference. This will ensure safe use and reduce the risk of injury. Be sure to pass on this manual to new owners of this product.
Contents Welcome ............................................................................................2 Contents ............................................................................................3 Important Safety Instructions............................................................4 FCC Statement ........................................................................................................5 IC Statement ..........................................................................
Important Safety Instructions READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR USING THE SYSTEM This product is intended to assist in safe driving and to allow the driver to have a broader view while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to your local traffic regulations. Do not use any features of this system to the extent it distracts you from safe driving.
Important Safety Instructions Use Ɣ Electrical appliances and overhead power lines can affect the wireless signal. Ɣ Do not place the monitor in a location where it might hinder field of vision while driving. Ɣ Consideration should be given to any airbags when installing the monitor. Do not place the monitor where it might hinder the airbag or become hazardous if the airbag is deployed. Care Ɣ Do not wash the vehicle with an automatic car wash or high pressure water. This may damage the camera.
Important Safety Instructions IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. RF Exposure The device has been evaluated to meet general RF exposure requirement.
Product Overview Product Description The Furrion Vision S Camera System is designed to assist the driver by providing a clear and wide image of the area behind the vehicle whenever the vehicle is shifted into reverse. Never rely solely on this product to ensure the area is clear of children and/or obstructions. Use your monitor and look both ways. This product is not intended to replace existing safety procedures, but rather to add an additional safety tool for your vehicle.
Installation READ THIS MANUAL BEFORE INSTALLATION NOTE: We have included all of the items needed for most standard installations, but all vehicles are different. We recommend you review your vehicle completely before starting. What’s in the Box Fig. 1 Make sure you have the following items included in the packaging. If any item is damaged or missing, contact your dealer.
Installation possible at the rear of the vehicle. Ɣ Horizontal-center of the vehicle or as close as is optimal. Ɣ Mount camera at least 2 inches above or below running lights. Close proximity to lights may cause image blooming, blurring and reduced night vision performance. Ɣ The area should be flat with enough surface area to accommodate the bracket. Ɣ The surface area should be clean and dry for a watertight installation. Ɣ Ensure that power can be fed to the installation area from within the vehicle.
Installation mounting and attach the cover. (Fig. 14) »” Fig. 11 3. Feed the supplied 6-foot camera power cable through the gasket. Ensure the bare end of the cable goes into the vehicle and the flat side faces inward. (Fig. 12) Camera Power Cable Bracket Gasket Fig. 12 4. Fix the gasket and bracket to the vehicle using four 3/4” flat self-tapping screws. Make sure the camera power cable is not wrapped or extruded. (Fig. 13) Fig. 14 7.
Installation Fig. 17 10. Place the attached cables and connections into the bracket housing by first placing the cable to the right. (Fig. 18) Fig. 20 Rear Camera Installation (if purchased) A traffic light must be installed together with the camera. For best performance, we recommend a Furrion traffic light is selected. 1. Select a suitable position on the back of the vehicle wall where you would like to install the camera. 2.
Installation Fig. 23 Fig. 26 4. Pull to remove the decorative part from traffic light and save in a safe place in case of future use. (Fig. 24) Fig. 27 Fig. 24 5. Secure the traffic light base on the vehicle wall using the four flat self-tapping screws. (Fig. 25) 7. Replace the lens cover over the traffic light base and press until a “click” is heard. The camera is now fully installed onto the vehicle. (Fig. 28 and Fig. 29) Fig. 28 Fig. 25 6.
Installation 8. Repeat steps 1 to 7 to install the other camera. Electrical Connections Connects to 12V/ 24V Power Supply Connects to Camera Consult the vehicle’s service manual for specific wiring color code. Connecting the Monitor Ɣ Route the power cable to the vehicle’s cigarette lighter socket 12/24V power outlet. The cable must not interfere with the safe operation of the vehicle. Ɣ Insert the small 12/24 Volt DC plug of the power cable into the right side of the monitor.
Getting Started The camera and monitor need to be paired the first time you are using your Vision S Camera System. NOTE: Ensure both the camera and monitor has power supplied during pairing and setting processes. (The vehicle may need to be running.) Pairing the Camera and Monitor Use or button to highlight PAIRING menu, then press to enter the next page. Activate the Monitor In off mode, press the button on the right of the monitor to turn on the monitor.
Getting Started 2. Once paired successfully, a red will appear after the device list. icon 3. An icon indicates pairing failed, repeat steps 2 and 3 to pair again. 4. Refer to “Camera Settings” section for detail settings of the camera.
Change Settings Camera Setting Use or button to highlight SETUP menu, then press to enter the next page or press button to return to the previous page. VOLUME SETTING 1. Use or button to highlight VOLUME menu, then press to enter. 2. Press to increase the volume or press to decrease. MIRROR SETTING 1. Use or button to highlight MIRROR menu, then press to enter. AUTO DIM SETTING 2. Press or button to set the camera image as NORMAL (0o), ROTATE (90o), FLIP (180o) or FLIP & ROTATE (270o).
Change Settings the light detective function. MOTION DETECT SETTING The motion detect function is used to detect objects in motion and assist in safe driving while the vehicle is in reverse. When on, the monitor LCD will be illuminated automatically when motion is detected. 1. Use or button to highlight MOTION DETECT menu, then press to enter. LCD AUTO OFF SETTING 1. Use or button to highlight LCD AUTO OFF menu, then press to enter. 2.
Change Settings Picture Setting Software Version 1. Use or button to highlight LCD AUTO OFF menu, then press to enter. Use or button to highlight VERSION menu, then press to enter and view the current software version. 2. Use or button to highlight BRIGHTNESS, CONTRAST or COLOR menu, then press to enter. 3. Press or to change the BRIGHTNESS, CONTRAST or COLOR setting. Press to confirm your selection or press button to return to the previous page.
Operation The Wireless Vehicle Rear Observation System operates when the vehicle is shifted into reverse. The Camera transmits a clear and wide image with Audio from the area behind the vehicle to the monitor inside the vehicle. During the vehicle in moving, the speaker is recommended to be mute. The monitor, when powered, remains in sleep mode until it receives a video signal on the 2.4GHz frequency. When the monitor receives a video signal, it automatically turns on and displays the image from the camera.
Care and Cleaning Though your monitor requires little care, you will still need to maintain its condition and performance by following the guidelines below. Ɣ Keep your system away from excessive moisture, extreme heat or cold. Ɣ Keep liquids away from the display. Ɣ Occasionally clean the surface of the monitor with a soft cloth moistened with water or glass cleaner. Only clean the unit with a dry cloth. Do not clean the unit with strong chemical agents or abrasive cleaners.
Specifications Specifications SUPPLY VOLTAGE DC8 to 30V WIRELESS FREQUENCY 2.4 GHz WIRELESS RANGE 150m (open area) TRANSMITTING SPEED 6 Mbps (single) RECEIVING SENSITIVITY 18+/-2dBm DECOMPRESSION FORM H.264 DELAYING TIME <250ms CAMERA IMAGE DISTANCE <5m CMOS SIZE 1⁄3” OPTICAL LENS F2.
Troubleshooting Problem Solution Check the power cable is connected. Monitor won’t turn on (no blue LED) Check the cigarette lighter has 12-24V DC Output. Check the fuse in the cigarette socket adapter. Check if the camera is receiving power. Camera & Monitor won’t pair Make sure to hold the camera pairing button for 2 seconds. Check if the camera antenna is fitted and secured correctly - it should be vertical. Distance between camera and monitor is too great. Reduce distance between Camera and Monitor.
Warranty Furrion warrants for a period of 1 year from date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a Furrion authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials, and workmanship. In case of such defect, Furrion shall replace or repair the product at no charge to you.
Warranty FURRION IS NOT RESPONSIBLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF ANY EQUIPMENT OR PROPERTY, ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH FURRION PRODUCTS.
Bienvenue Merci d’avoir acheté ce système de caméra Vision S de Furrion®. Avant utiliser votre nouvel appareil, veuillez lire ces consignes attentivement. Le présent guide d’utilisation contient des informations permettant l’utilisation, l’installation et l’entretien en toute sécurité de l’appareil. Veuillez conserver le présent guide d’utilisation en lieu sûr pour vous y référer ultérieurement, afin d’assurer votre sécurité et de réduire les risques de blessure.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment.