User's Manual
2)set the ALARM time
Press and hold the 6 button repeatedly to ALARM time setting mode(the LCD will display the
time “AM 00'00 “ but not flash), then use the / button to set the MINUTE and VOLUME
+/- button to set the HOUR.
9. To reset unit
1,Press RESET with a cuspidal object to make the unit be reset to factory default and
re-instate the correct functions.
2, In AUX mode, Press and hold 2/STOP button until the LCD displays “RESET III, then
press and hold 3/RPT button to reset to the factory default.
Radio Operation:
1. To select radio band
Press AM/FM button briefly and repeatedly to select a desired radio band in
sequence and circulation as follows:
-->FM1-->FM2-->FM3-->AM1-->AM2--> .
2. To search for radio station manually or automatically
Press >>| or |<< button briefly to manual tune up/down for your desired radio stations
step by step.
Press and hold >>| or |<< button for 2 seconds to automatically tune up/down for
a radio station of strong signal.
3. To store current station or turn on a preset one
1) If you want to store currently station, press and hold the AM/FM button until the frequency
flashes, then press briefly one of the 6 number buttons to store the current station in the
preset memory bank of the number button for the current band.
In this way the unit can store 30 preset stations.
2) Press one of the 6 number buttons briefly to turn on the preset station stored in
the preset memory bank of the number button for the current band.
4. To auto search and store for the strongest stations
When pressing and holding 2/STOP button on the front panel for more than 2seconds, the
radio searches from the current frequency and checks the signal strength level until the 6
strongest stations are found. And then the 6 strongest stations are preset to the corresponding
preset memory numbered bank. The auto-storage operation is implemented in the each
selected band. When the auto-storage operation is finished, the radio executes Preset scan.
5. To set the frequency
Press and hold SEL button for more than 2 seconds to turn on BASS, then press SEL button
shortly and repeatedly until displays one of the area AMERICA3,AUSTRIA or EUROPE, then
use the VOLUME+/- button to selection and briefly press the SEL button for your confirmation.
USB Operation:
1. To insert or pull out USB stick
When needing to playback USB music, insert USB stick into the USB socket, then the
playing mode will be changed into USB mode and display “USB” on the LCD.
2. Press the or button briefly to play previous or next track.
3. To play fast forward or backward
Press and hold or button to play backward or fast forward.
4. To play previous or next 10th track
Press 5 or 6 button to play previous or next 10th track.
5. How to use 1/PLAY/PAUSE button
During playback, press 1/PLAY/PAUSE button to pause playback. When in pause mode,
press 1/PLAY/PAUSE button to play again.
Press and hold 1/PLAY/PAUSE button to select the first track for playback.
6. To repeat track(s)
During playback, press 3/RPT button briefly to play the current track repeatedly, and
the LCD will display RPT ONE.
Press RPT button twice to play the tracks in the Album repeatedly, and the LCD will
display RPT DIR.
Press RPT button thrice to RPT ALL tracks, and the LCD will display RPT ALL.
Press RPT button four times to cancel RPT function , and the LCD will display RPT OFF.
7. To play tracks in random
During playback, press RDM button briefly to play all tracks in random. Press it again
to cancel RDM function.
8. Tracks search
Press USB button, it will activate TRACK SEARCH mode . The LCD will
display TRK 0/00/000(deside on the total number of tracks in the SD card or
USB stick) and flash the 0 on the biggest digit position. Then use the VOLUME +/- button
to select a number on the flashing digit position from 0 ~ 9. Then press USB button to
confirm the number and flash the 0 on next smaller digit position. With the same means,
select the number on the flashing digit position with VOLUME +/- button. After finishing
selecting the numbers on all digits position, press 1/PLAY/PAUSE button to play the track
of the selected serial number.
BlueTooth Handsfree System:
1. Pairing
Turn on Bluetooth mode of mobile phone, then select the function of Finding
Bluetooth Device and enter it. After finishing the finding, it will show the name of
Bluetooth Device "FURRION DV7100" , select it and enter it, (for some phones it maybe
need a password, In case of this situation please Input the password 0000),then the
LCD of the car audio system will display “BT LINK”.
2. Use mobile phone to do connection or disconnection
1) In connection status, find the paired and connected Bluetooth Device, then
press the disconnection button to do disconnection.
2) In disconnection status, find the paired and disconnected Bluetooth Device,
then press the connection button to do connection
3. In connection status: Mobile phone transfers to car audio player whenever a
dialing takes place; Mobile phone transfers to car audio player whenever
receiving a call.
4. Dialing when in connection status
Page 3
Page 4