“CARRION TV/AM/FM/LTE ROOFTOP ANTENNA WITH CEILING MOUNT BRACKET Instruction Manual [SLT EIR AT: ye Ceiling Mount Bracket
Thank you for purchasing this Furrion® TV/AM/FM/LTE Rooftop Antenna with ceiling mount bracket. Before operating your new product, please read these instructions carefully. This instruction manual contains information for safe use, installation and maintenance of the product. Please keep this instruction manual in a safe place for future reference. This will ensure safe use and reduce the risk of injury. Be sure to pass on this manual to new owners of this product.
Welcome... Contents .. Product Overview Product Features. Installation What's in the Box Mounting the Antenna. Installing the Ceiling Mount Bracket Mounting the Wall Plate. Connections Wiring Diagram Testing the Power Suppl; Operation. Running a Channel Scan Selecting TV Antenna Reception. Selecting Cable Tv Specifications Warranty...
J TIS Ea LA Product Features # Compatible with HDTV of various digital terrestrial signals (DB-T, IS DB-T, DUMB, SCAT, stereo and FM/AM radios. # The waterproof housing is UV resistant, and is designed for superior durability using injection molded ASA material. # Omani directional antennas receive VHF, UHF, FM and AM signal from every point regardless of the direction you are traveling. # Built-in high gain and low noise amplifier.
Installation Do not install couplets, splutters, etc. between the power supply and the antenna. Installation of any item on the download may cause a short in the system. The download supplies +12VDC to the preamble in the antenna. The power supply should be turned OFF when connecting or disconnecting cables to the power supply and antenna, but should be turned ON when voltage testing. What's in the Box Make sure you have the following items included in the packaging.
Installation 5. Fix the LTE antenna base on the RV roof using seven stainless steel self tapping screws and tighten using a screwdriver. (Fig. 4] NOTE: Do not over tighten as damage to the base may occur, which will void the warranty. A screw angle up to 30 degrees is acceptable without damaging the base. 6. Insert the bottom collar of the TV antenna wing into the center hole of the LTE antenna base. (Fig. 5] Make sure the rubber seal on top of the LTE antenna base is in location. 7.
Installation 9. Follow the wiring guidelines below to connect the cables of TV/FM antenna [black] and FM/AM antenna (white) from the interior of the RV ceiling. See “Wiring Diagram” section for detail. — TV/FM antenna (Black) with extension cable to DC powered wall-plate. — FM/AM antenna (White) to audio system. Using the Existing Opening 1. 2. 3. Unscrew and remove the old TV antenna from the RV rooftop. Remove all caulking compound around the opening.
Installation 7. Fix the antenna base on the RV roof . ae using seven stainless steel self Installing the Ceiling Mount tapping screws and tighten using a Bracket screwdriver. (Fig. 11) NOTE: Do not over tighten as damage to the base may be occur, which will void the warranty. A screw angle up to 30 degrees is acceptable without damaging the base. NOTE: It is recommended that you have all the wires connected before permanently installing the ceiling mount bracket onto the rooftop.
Installation — LTE Antennas: Connect to the rooftop unit by mapping the same wire color. — Power Wires: Connect to the RV +12Vde [current rating >1A] power source. Red is power wire, Black is ground wire. — Network Wires: Connect to the network interface in the RV. [Power Wires LTE Antenna Network Wires 3. Cover the base of the ceiling mount bracket over the cutout area and secure with eight stainless steel self tapping screws [not supplied). [Fig. 15] 4.
Wiring Diagram Refer to accessories page for planning connections. WARNING: The wall plate should be turned off while connecting cables. Connect the cables from the antenna to distribution wall plate and to the FM radio [AM Radio needs to connect the FM/AM antenna from the rooftop unit). Connect the power cables from the distribution wall plate according to the diagram below. omen L. fy oy Eternal Bede Agni EE — Le Testing the Power Supply Make sure your TV set is working properly.
Running a Channel Scan To receive maximum number of channels, a channel scan is required once the antenna and power supply have been correctly installed and all cables have been properly connected. A new scan might find any new channels that have been added in your area or find any channels that have been changed or moved since the last scan.
Furring warrants for a period of 1 year from date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a Furring authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials, and workmanship. In case of such defect, Furring shall replace or repair the product at no charge to you.
FURRING IS NOT RESPONSIBLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF ANY EQUIPMENT OR PROPERTY, ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH FURRING PRODUCTS.
FURRINESS Furring Innovation Center & Institute of Technology © 52567 Independence Ct., Elk hart, IN 44514, USA @ Toll YE TT ©2007-2018 Furring Ltd. Furrion® and the Furring logo are trademarks licensed for use by Furring Ltd. and registered in the U.S. and other countries. LLL LR] IM-FAY00027 V1.
