User's Manual

b) Low frequency stimulation to body
1) Press power button on the top of the cushion for at least 2 seconds to turn on
the product.
2) Connect the low frequency cable to the low frequency jack (12) on the back of
the cushion and attach the low frequency pad (13) to the desired area such as
the waist, shoulder, and arm as shown in Fig 25.
3) Click the body button (3) in Figure 22 once and then press the + button (4)
and the - button (5), and the mode (9) is changed on the LCD screen in Figure
23 to select the desired mode.
4) If you press the body button (3) twice and then press the + button (4) and the
- button (5), the time (11) changes on the LCD screen in Fig. 23 and the desired
stimulation time is selected.
5) Click the body button (3) three times and then press the + button (4) and the
- button (5) the intensity (10) changes on the LCD screen in Fig 23 so that you
can adjust it to the desired intensity.
(Figure 24. Connecting a low-frequency pad) (Figure 25. Using for body)