Operator's Manual

1. OPERATION
1-14
1.7.2 Target list (displaying target data)
1. At the plotter display, press the [DISP] key to show the TARGET LIST,
which lists all AIS targets being detected by the FA-150.
Note: You may also choose the target directly on the plotter display. Press
◄ or ► to color the circle of the wanted target in black and then
press the [ENT] key. The display then looks something like the one
shown at the top of the illustration on the next page. If you wish to
see other data of the target, go to step 3 below.
Target's name, and
range and bearing
(from north) from
own ship to target
Press  to switch to
Dangerous List.
(See para. 1.7.3.)
n
m
NAME RNG( ) BRG( ° )
FURUNO 2.9 276.1
VOYAGE 3.1 292.9
QUEST 4.3 279.5
SEADOG 15.6 82.0
INTREP 21.1 123.1
GLOBER 28.8 246.3
1/ 10 [  ] DTL[ENT] DNG[  ]
[TARGET LIST]
+
Target type symbols
None: Ship
+
: Base station
: SAR
: AtoN
Target list
2. Use ▼ or ▲ to choose the target whose data you wish to view, and then
press the [ENT] key. The display then looks something like one of the
displays shown on the next several pages, according to type of target. (If
there is no data for the target selected the message NO SEL appears. Hit
any key to escape.)
3. Use ▼ or ▲ to scroll the display to see other data.