Operator's Manual

1. OPERATION
1-20
1.7.3 Dangerous (target) list
You can easily find dangerous ships whose CPA and TCPA are lower than the
CPA and TCPA alarm settings.
1. At the plotter display, press the [DISP] key to show the Target List (see
paragraph 1.7.2).
2. Press ► to show the Dangerous List.
[DANGEROUS LIST]
NAME CPA TCPA
n
m
( )
Target name,
CPA and TCPA
FURUNO 0.50 3'20"
EXPLOR 1.20 3'35"
INTREP 1.80 3'50"
VOYAGE 1.90 3'55"
SEADOG 2.00 4'00"
1/ 10 [
 ] DTL[ENT] RNG[  ]
Press  to sort and view
targets in order of range from
own ship.
Dangerous list
3. To find detailed information about a dangerous target, use ▼ or ▲ to
choose the target and then press the [ENT] key. Use the CursorPad to view
other data; ▼ or ► to go forward, ▲ or ◄ to go back. (If there is no data for
the target selected the message “NO SEL” appears. Hit any key to escape.)
Note: The message “LOST” appears at the top of the Dangerous List when no
AIS signal is received from the selected target.
1.7.4 Own ship’s static data
The OWN STATIC DATA display shows own ship’s static data, which includes
MMSI, call sign and name, IMO number, length and beam, type of ship and
location of position fixing antenna, on five pages. This data should be checked
once per voyage or once per month whichever is shorter. Data may be
changed only on the authority of the master.
1. At the plotter display, press the [DISP] key twice to show “OWN STATIC
DATA 1/5”. See the next page.
2. Use the CursorPad to view other own static data; ▼ or ► to go forward, ▲
or ◄ to go back.
See the illustration on the next page for own ship’s static data examples.