Operator's Manual

1. OPERATION
1-26
SCROLL[  ] QUIT[MENU]
[RCVD MSG]
I HAVE CHANGED MY
COURSE TO 350 DEGREE.
Received message example
6. Press the [MENU] key several times to close the log and return to the
plotter display.
Automatically displaying received messages
You may automatically display incoming messages as follows:
1. Press the [MENU] key to open the menu.
2. Use the CursorPad to choose USER SETTINGS and then press the [ENT]
key.
QUIT[MENU]
[USER SETTINGS]
KEY BEEP :
ON
ALARM BUZZER : ON
DISP RCVD MSG : ALL
RCVD MSG BUZZ: ON
LR MODE : AUTO
CPA/TCPA ALARM
USER SETTINGS sub-menu
3. Use the CursorPad to choose DISP RCVD MSG and then press the [ENT]
key.
ALL
ABM
OFF
4. Use the CursorPad to choose which category of receive message you want
to display automatically and then press the [ENT] key.
ALL: Display any message upon receipt
ABM: Display only addressed binary messages upon their receipt
OFF: Disable automatic displaying of incoming messages
5. Press the [DISP] key to close the menu and return to the plotter display.