Operator's Manual

1. OPERATION
1-33
1.11 Long Range Mode
The long range mode sets how to reply to a request for own ship data from a
distant station, for example, Inmarsat C station. You may reply automatically or
manually.
1. Press the [MENU] key to open the menu.
2. Use the CursorPad to choose USER SETTINGS and then press the [ENT]
key.
QUIT[MENU]
[USER SETTINGS]
KEY BEEP :
ON
ALARM BUZZER : ON
DISP RCVD MSG : ALL
RCVD MSG BUZZ: ON
LR MODE : AUTO
CPA/TCPA ALARM
USER SETTINGS sub-menu
3. Use the CursorPad to choose LR MODE and then press the [ENT] key.
AUTO
MANUAL
4. Use the CursorPad to choose AUTO (auto reply) or MANUAL (manual
reply) as appropriate and then press the [ENT] key.
5. Press the [DISP] key to close the menu and return to the plotter display.
Manual reply
For manual reply, the left-side message below appears when a request for own
ship data arrives from a distant station. Press the [ENT] key to send the data,
or press any key other than [ENT] to send no data.
Automatic reply
For automatic reply, the right-side message below appears when a request for
own ship data arrives from a distant station. Ship’s data is automatically
transmitted. Press the [ENT] key to erase the message.
[RECEIVED LR]
MMSI: 431456789
NAME: FURUNO
C
RESPONSE?
YES: [ENT] NO: OTHER
LR Message (Manual reply)
[RESPONDED LR]
MMSI: 431456789
NAME: FURUNO
C
PRESS ANY KEY
LR Message (Automatic reply)
Information
requested
(See table
on next page.)