Operator's Manual

2. MAINTENANCE, TROUBLESHOOTING
2-13
2.9 Restoring Default Settings
You may clear all or specific settings to start afresh with default settings. When
all data is cleared, the default settings for all items in the INIT SETTING and
SYSTEM SETTINGS sub-menus are restored. GPS data is also cleared;
however, MMSI and IMO numbers, ship’s name and call sign are not cleared.
1. Press the [MENU] key to open the menu.
2. Use the CursorPad to choose DIAGNOSTIC and then press the [ENT] key.
3. Use the CursorPad to choose MEMORY CLEAR and then press the [ENT]
key.
QUIT[MENU]
[MEMORY CLEAR]
MONITOR CLEAR
SET USER DEFAULT
GPS COLD START
MEMORY CLEAR sub-menu
4. Use the CursorPad to choose MONITOR CLEAR, SET USER DEFAULT or
GPS COLD START as appropriate and then press the [ENT] key.
DISPLAY CLEAR: Restore default settings for dimmer, contrast
CPA/TCPA, key beep, audible alarm, and received
message alarm.
USER DEFAULT: Clears all user settings except MMSI No., IMO No.,
ship’s name and call sign.
GPS COLD START: Clears GPS Almanac to receive latest Almanac.
MONITOR CLEAR.
ARE YOU SURE?
YES
NO
SET USER DEFAULT.
ARE YOU SURE?
YES
NO
GPS COLD START.
ARE YOU SURE?
YES
NO
MONITOR CLEAR USER DEFAULT GPS COLD START
Confirmation screens for memory clear
3. Press ◄ to choose YES and then press the [ENT] key.