User's Manual

ii
SAFETY INSTRUCTIONS
The operator must read the safety instructions before attempting to operate this equipment
WARNING
Immediately turn off the power at the
switchboard if water leaks into the
equipment or something is dropped
in the equipment.
Continued use of the equipment can
cause fire or electrical shock. Contact a
FURUNO agent for service.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury
can result.
Do not place liquid-filled containers
on the top of the equipment.
Fire or electrical shock can result if a
liquid spills into the equipment.
Use the proper fuse.
Use of the wrong fuse can cause fire or
permanent damage to the equipment.
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel should work
inside the equipment.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Unit: PR-240 Power Supply
Name: Warning Label (1)
Type: 86-003-1011-3
CodeNo.: 100-263-233-10
WARNING LABEL
A warning label is attached to the AC-DC power
supply. Do not remove the label.
If the label is missing or damaged, contact a
FURUNO agent or dealer about replacement.
Mandatory Action
Prohibitive Action
WARNING
CAUTION
Warning, Caution
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
WARNING
Immediately turn off the power at the
switchboard if the equipment is
emitting smoke or fire.
Continued use of the equipment can
cause fire or electrical shock. Contact a
FURUNO agent for service.
Make sure no rain or water splash
leaks into the equipment.
Fire or electrical shock can result if water
leaks in the equipment.
Do not operate the equipment with
wet hands.
Electrical shock can result.
The glass of an LCD panel breaks
easily. Handle the LCD carefully.
Injury can result if the glass breaks.
About the TFT LCD
The TFT LCD is constructed using the latest LCD
techniques, and displays 99.99% of its pixels. The
remaining 0.01% of the pixels may drop out or blink,
however this is not an indication of malfunction.
Do not approach the antenna closer
than listed below when it is
transmitting.
The antenna emits radio waves that
can be harmful to the human body.
RF power density on antenna aperture Distance
100 W/m
2
10 W/m
2
2 W/m
2
0.09 m
0.04 m
N/A