User Manual

3. DSC OPERATION FOR NON-DISTRESS CASES
3-10
3. To send the ACK BQ manually, press the ENT key. The pop-up window
shown below is displayed.
ABLE
UNABLE
4. Choose UNABLE and press the ENT key. The following pop-up screen
appears.
NO REASON
BUSY
EQUIP DISBLD
MODE UNAVAIL
CH UNAVAIL
5. Press the ENT key and the entry window of working channel appears.
6. Key in a working channel and press the ENT key.
** Send Message **
SHIP ACK
ID : 123456789
TCmd1 : UNABLE
TCmd2 : NO REASON
CH : NO INFO
PRESS CALL TO SEND
ROUTINE
7. Press the CALL key more than three seconds to transmit the ACK BQ. The
display changes to the standby display with channel specified.
3.2 Group Call
A group call is for calling a specific group by specifying its group ID.
Up to 20 group IDs can be registered. When you set the group call in a message
file, its group ID is stored automatically (see paragraph 4.5). To confirm group
IDs, open the SYSTEM menu.
3.2.1 Sending a group call
1. Press the CALL key. The display changes to the COMPOSE MESSAGE
screen and the CALL TYPE is displayed in reverse video.