User Manual

4-1
4. BASIC SETUP
4.1 Alarm Setup
This section provides the procedures for setting up various alarms. The alarm
menu enables/disables internal and external alarms. Note that the
Distress/Urgency alarm cannot be disabled.
Disabling/enabling old position alarm in manual position entry mode
This alerts the operator when manually entered position data is older by the
number of hours or minutes set in the next Position Older field.
1. Press the MENU key.
**** SETUP MENU ****
ALARM
ERASE LOG
MEMORY CHANNEL
AUTO ACK
MESSAGE FILE ENTRY
T
* SETUP MENU *
ALARM
ERASE LOG
MEMORY CH
AUTO ACK
MESSAGE FILE
T
SETUP MENU on transceiver unit SETUP MENU on remote handset
2. ALARM is selected; press the ENT key to display the ALARM menu.
**** ALARM MENU ****
POSITION OLDER 4H
EXT ALARM DSTRS/URG
OLD POSITION OFF
* ALARM MENU *
OLD POSITION
OFF
T
POSITION OLDER
4H
ALARM MENU on transceiver unit
 ALARM MENU on remote handset
(You can get same information by
scrolling with up / down arrow
keys)
3. Rotate the CH knob (or press up / down arrow key) to choose OLD POSITION
from the ALARM MENU and press the ENT key. The setting window appears.
4. Rotate the CH knob (or press up / down arrow key) to choose ON or OFF as
appropriate and press the ENT key. If you chose ON, the message "Warning:
Update position" appears when manually entered position is older than the
time set on the ALARM MENU.
5. Press the CANCEL key twice to return to the standby display.