User's Manual Part 2

8. NBDP PREPARATIONS
8-5
8.3.2 How to edit/delete stations
1. Press the function key F5 then the 1 key to open the [Station Entry] screen.
2. Press the ↓ key to select a station name from the [Station List].
3. Press the → key then the ↓ key to select [Change] and press the Enter key.
4. Do one of the following;
Edit station: Use the ↑, ↓ and the Backspace keys to make corrections.
Delete station: Erase station name with the Backspace key.
5. Press the Enter key twice.
6. Press the Esc key.
8.4 Timer Programming
A built-in timer allows you to automatically receive and transmit files. 10 timer pro-
grams can be registered. To enable timer operation, see section 10.6.
8.4.1 How to register timer programs
1. Press the function key F5 then the 2 key to open the [Timer Operation Entry]
screen.
2. If [Create] is not underlined, press the →, ↑ and Enter keys to underline it.
3. With [Operation] selected, enter a suitable operation name on the [Operation] line.
Any alphanumeric characters can be used.
Note: If the operation name entered already exists, the message "Operation
name already exists. Press any key to escape." appears. Press any key and
change the operation name.
4. Press the ↓ key to select [Station].
5. Press the → key to display [Station List] (which you registered stations in the pre-
vious paragraph).
6. Press the ↓ or ↑ key to select a station then press the Enter key.
7. Press the ↓ key to select [Start Time]. Enter start time, in 24-hour notation. To
have the operation start at 8:35 a.m., for example, the keying sequence would be
0 8 3 5 0 0.
Create
Change
Timer Operation Entry
Timer Operation List
Timer Operation Set Up
Operation :
Station :
Start Time : 0: 00: 00
Stop Time : 0: 00: 00
Receive/Send : Receive Send
File to Send :
Press the  key to show the station list, the file list.