User's Manual Part 2

9-1
9. NBDP FILE OPERATIONS
This chapter mainly describes how to create, save, open, edit and print files. The [Edit]
menu provides a full lineup of editing facilities, including search and replace.
9.1 How to Open and Close Files
To create a telex message, you need to make a new file with the File Open command.
When you open a new file, it is placed (opened) in one of two working areas. When
both working areas are occupied, you must close a file to open a new file. This is done
with the File Close command.
How to open a file
9.2 How to Create Files
There are two modes for creating the files; for messages and for macros.
• For messages: You can enter only the characters which are sendable in NBDP
comminication. Press the function key F1 then the 1 key to create a message file.
• For macros: You can enter only the characters ( ) which are used in a macro
command. Press the function key F1 then the B key to create a macro file.
1. Press the function key F1 to open the [File] menu.
1
2
Floppy Disk Memory
or SD Card Memory
File 1
File 2
File 3
Display Unit's Memory
(Working area)
One of
two
Display
Switchable. Select [Change
Text] on the [Edit] menu.
$ @ _ |
1: New
2: Open
3: Close
4: Delete
5: Rename
6: Real Time Printing
7: File to Print
8: Cancel Printing
9: Clear Buffer
0: SD Card Format *
1
A: Remove SD Card *
2
B: New Macro *
2
File
*1: [Floppy Disk Format] for IB-583
*2: Only for IB-585