User's Manual

4. INSTALLATION

4-3

4.2 Receiver Unit

General mounting considerations

• The mounting location should be well ventilated and dry.

• The unit can be mounted on bulkhead or the desk.

• Secure the maintenance space shown in drawing at the back of this manual

for ease of maintenance and service.

Mounting Method

Fasten the receiver unit with four self-tapping screws (5x20, supplied as

installation material). For bulkhead mounting, tighten upper self-tapping screws

so there is 5 mm clearance between bottom of screw head and bulkhead. Then,

hook the receiver unit on the upper screws. Tighten upper screws followed by

the lower screws.

210+1

Fixing hole 2- 6

205+1

210+1